1. Home
  2. Machine Embroidery
  3. HoopitAll

HoopitAll

Hello one and All.....I have a Janome 300E.....and i have purchased the Giga Hoop for it as well...what i want to be able to do...is to make cushion covers...(for any kind of cushion) What i need help with please is this.........With the right size cushion top to match the size of the Giga hoop.....can i sew everything out in just one go...with out having to move the hoop around....I have Embird software...which i love and find it the best one for "me"....its very user friendly and thats really what i need......due to disabilitys...i cannot sit too long at the machine....and what i have asked help for....would help me sooooooo much...less sitting...means less problems for me...

Thank YOu for any help you can offer.....

HappyDwarfxx

Reply to
happydwarf
Loading thread data ...

I have the 300E as well plus the Giga Hoop for it and as far as I know you have to do half at a time. First half then turn the hoop around then the other half. The idea of the Giga Hoop is to be able to embroider larger than the 5/7 designs, thats why if you make the template in the Customiser 10000 plus it will allow you to do this.

Reply to
Quilter

G'day HD and Quilter

Have you joined the 300E group? Lots of friendly, helpful people there.

formatting link
is right about splitting the design, stitching side 1, turning and stitching side 2. The GigaHoop is really 2 x B hoops with an overlap section in the center. Splitting can be done in Customiser 10000 or Embird.

The hoop needs to be supported, several ways of doing this...either an extension table for your machine, or books stacked....whatever you can find to support the hoop is OK.

Hoping this helps? See you in the 300e Group.

Bronwyn ;-)

Quilter wrote:

Reply to
HC

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.