1. Home
  2. Machine Embroidery
  3. Thread nest problem.

Thread nest problem.

Hi everyone- I m using a Bernette 340 Deco(now made by 'jancome' thats the name on the plate on the inside of the machine spelt?)

Just today I have been getting these huge thread nests that clog the process and I cant figure out what I should be looking for.

I changed the needle three times, changes the bobbin twoce, adjusted the tension up and down and it just seems to get worse.

should I bring it in to get serviced? its only 8 months old.

TJ

-- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service ------->>>>>>

formatting link

Reply to
TJ ODonnell
Loading thread data ...

You didn't say if you re-threaded the top thread. Usually this sort of problem is from threading the top thread with the presser foot DOWN. Try re-threading it with the presser foot UP.

5 foot 2
Reply to
5 foot 2

THANKS SO MUCH! it worked! I cant believe something as simple as HOW i was threading it made all the difference!

Got a whole lot to learn! thank you thank you!

TJ

-- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service ------->>>>>>

formatting link

Reply to
TJ ODonnell

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.