You need a wheel and a cap, probably a riser, but for the life of me I can not think of one lamp shade, actual Tiffany pattern or not, that would fit on a floor lamp with a 4" opening. How about posting a link to a picture, not the actual picture, so we can see what you are trying to do. Bet Howard can help here... ============================================= TRICKY........... one bulb socket? or multiple sockets? how does it turn off and on? switch at the socket? OVERALL SIZE OF SHADE AND WEIGHT!!!!!!!!!!!!
are you going to mount it upside down (small end toward the floor)? or conventional mounting with the large open end down?
If it conventional mount.....easy to do as Java said..... if you use a cap, wheel and ring, ring needs to be soldered into opening (level) ring sits on wheel which has a 1/8 NPT thread that should fit onto bulb fixture if multiple bulbs in base...... If single bulb, you need to take base apart and put in a saddle and harp arrangement and adapt the screw on top of the harp to take the 1/8 nipple. Here weight may be a problem.
All the hardware is available and "cheap"...but try to find it!!!!!!!!!!!! I probably HAVE anything and everything you need for this project before this gets way too deep, supply me with a photo or more accurate information.
email to the NG
h