polish pottery souppliers

Hi my name is Justyna ,i would like to know where in Poland can i get prime materials , glazes, look at the kilns , meet up with people related to ceramics.Can anybody help me please?thank you!:)

Reply to
justyna
Loading thread data ...

Hi my name is Justyna ,i would like to know where in Poland can i get prime materials , glazes, look at the kilns , meet up with people related to ceramics.Can anybody help me please?thank you!:)

Reply to
justyna

U¿ytkownik "justyna" napisa³ w wiadomo¶ci news: snipped-for-privacy@m73g2000cwd.googlegroups.com...

hello, firstly you shoud check our polish group - for example:

formatting link
another with adds:
formatting link
you can find all information about shops for potters in Poland.joanna

Reply to
Joanna

What are the chances of us getting you to translate for us Joanna? I saw this great oil drum kiln on the site you posted and wonder what it is used for and how it is fired.

Donna Plenerowy piec gazowy "... Rurke tniemy na plaserki grubisci 5-10 mm i pozostawiamy kawalek dlugosci ok. 10 cm. Do tej operacji mozna uzyc szlifierki katowej z tarcza do ciecia kamienia ..."- Dasz

Reply to
DKat

U¿ytkownik "DKat" napisa³ w wiadomo¶ci news:BYRVg.41$ snipped-for-privacy@newsfe08.lga...

This is a gas raku kiln :). The instuction is really long and I'm pretty sure that I couldn't easly manage with this whole translation job without dictionary and a few free hours :). But I think that I saw something similar somewhere on english sites. I'll check it tomorrow.

joanna

Reply to
Joanna

czesc Aska , dzieki wielkie za podanie nazwy strony.zaraz ja sprawdze.apropos ciecia rurek do pieca raku to jest niezla ksiazka Ian-a Gregory pt.''kiln building''wydana przez.....A&C Black-London-seria nazywa sie CERAMICS HAND BOOKS.ian gregory jest wogole dobrze-''szurnietym'' konstruktorem piecow tak ze moze nawet na necie mozesz znalezc jego strone i opisy kt cie interesuja....a piec raku kt uzywam to tylko palnik , Fibre glass(niestety niewiem jak to przetlumaczyc)pare cegiel szmotowych i i metalalowa siatka kt od zewnatrz przytrzymuje fiberglas...no i pirometr:):):) powodzenia w tlumaczeniu i jeszcze raz dziekuje za nr.strony czesc

Joanna napisal(a):

Reply to
justyna

I'm sorry Joanna, I didn't mean for you to translate the instructions. Just the discription. What you did was good enough. If you do find an English version and share that would always be appreciated but don't go out of your way for it.

Thanks, Donna

Reply to
DKat

hi donna , i ll do my best:)!

Outdoor gas kiln: ''....we slice the pipe into 5-10 cm slices and we leave a bit that should be 10cm long.to do it best is recomended to use the ungelgrinder with stone cuuet bit....''...from my own experience i recomend to use metal bit t for cutting metal pipes:):):)! goodluck!

Justyna

Reply to
justyna

Reply to
DKat

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.