Missing yoke piece - help needed

While tidying out my cupboard I found a half finished nightdress made from Style pattern 1425. Unfortunately the cut out yolk pieces are missing - and so are all the pattern pieces!! But I do have the instructions.

Strange, I know, but true :))

Does anyone have a copy of this pattern ( size MD) or any suggestions how I can work out the size of the yoke?

The front of the nightbress is pleated and the back has to be gathered to fit the yoke. I do have the neck pieces cut out in material.

I'm sure there's a logical way to work it out but I'm afraid I'm out of my depth.

Any help gratefully received - this project was started a number of years ago and for some reason I never finished it. I'd like to finally get it done now.

Thanks

Susan

Reply to
S R Glickman
Loading thread data ...

If all else fails, you can blow up the cutting layout from the instructions on the copier until the yoke is about the right size. At least that will be a close approximation. Best of Luck, Laura

Reply to
Laura

That's an idea but are the layout pieces drawn to scale?

Thanks

Susan

Reply to
S R Glickman

instructions

50c at the copy shop will answer that for you. It's worth a try. Laura
Reply to
Laura

The scale seems to be 1:20 - I don't think a copier will increase 20 times all in one go.

I've been trying to scale it up on TruGrid paper but the curves are a problem!

Thanks

Susan

Reply to
S R Glickman

You're not going to believe this but after I posted back last night I went to put away my box of patterns and something fell down. In moving things to sort out what fell I saw a white envelope stuck between the wall and something - I opened it and inside were - the patterns pieces :))))))))

Thanks for your help.

(BTW - the scaled up drawing was not quite the right size - a bit too big.)

Susan

Reply to
S R Glickman

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.