No more flat fells for me

I've been flat felling the seams on my shirts since the outset. Always turns into a bother around the armscye. Or just a plain bother all together.

I've decided to ditch that route and instead use the overlock-like stitch my machine has on all the seams, then fold the allowance over and sew what looks like a flat fell seam 1/4" off the original seam.

No one will know until I take my clothes off, and that ain't been happening around company lately.

Reply to
Taunto
Loading thread data ...

Dear Taunto,

Please don't give up on your flat felled seams. You can cheat on the armscye--I sew a regular seam, serge it, then topstitch on the outside. The armscye seam allowance goes toward the shirt, making it easier to work with.

I do a variation of a felled seam on my historic costumes and historic doll clothing. But I do the seam from the inside, and the "felled" part of the seam is hemstitched down, forming a 1/8-inch seam.

Teri

Reply to
gjones2938

There's no more fun to it. Its tedious as all get out. I have a foot for it and everything, but I still get spots where the long piece doesn't curl completely under, and I get exposed edges which I either have to go back and fix, or forget.

I get the same effect doing as I described. The reason for the flat fell is to enclose all the fabric edges, I think. If I overlock the edges, it will serve pretty much the same purpose, unless that edge gets worn and comes apart, which I probably can after a long while.

Another problem with the flat fells is that the fabric can sort of form a hard knot from all that fabric folded over. But I guess its just as many layers with the way I'm describing.

I'll see. GOtta make a new shirt first. Still looking at the half finished jacket I started, and got stuck because of inadequate pattern instructions.

Dwight

Reply to
Taunto

How gloriously traditional! :) :) I have exactly this method described in one of my 1930's sewing manuals, and saw it in the flesh (or fabric, really!) on a much older shirt in the V&A. :) I'd do it if the customer paid enough - it looks so fantastic when done and is incredibly durable on a hand sewn garment.

I don't bother with a fancy foot. I just sew the seam, trim off the shirt seam allowance to half the width and press the sleeve allowance in place before sewing it. I stick a pin in any okkard spots, then sew. I got perfect results doing this at the weekend on a shirt for young James.

I made a shirt for my hubby over 20 years ago. I straight stitched the seams and then zigzagged and trimmed them. I didn't bother to sew them down as this was a practice shirt to make sure the pattern fitted and worked. It did, and he still wears that shirt!

The only place I get anything like this is over the seams of the yoke, but if you hammer it flat with the iron, and trim if off properly. there's no problem.

Which pattern are you using? Where are you stuck? We'll help you past the sticking point.

Reply to
Kate XXXXXX

I really don't blame you. If you were to look at a RTW ladies blouse, you'd see they are almost 100% serged seams.

For all blouse and shirts that I make, I use 100% serged seams. I only use the sewing machine for the collars, cuffs and the front plackets - oh - and the button holes!

For shirts for the men in my life, if I'm feeling like a more authentic finish, I press the seams flat, and topstitch about 1/4" away from the seam. As you noted, looks authentic from the outside, and no one is likely to examine the inside too closely!

I *might* just do this for one of my own shirts that I have planned which is a loud check. Now all I need is some time......

Sarah

Reply to
Sarah Dale

Something between the flat felled seam and what you're doing is the mock felled seam. Illustrated here:

formatting link
use mock felled seams all the time in outdoor gear and clothes. You get the edge of a felled seam but it's a _lot_ easier to sew. Mike

Reply to
Michael Daly

Dear Kate,

I started doing felled seams like this years ago when I was teaching textile resoration to my museology students. I had a bunch of extremely dirty undergarments of varying periods of the nineteenth century. I decided to use some of them as class projects. The first step is to identify the fabric--in this case either linen or cotton, using a linen tester and then a microscope. One of the chemises in the group had such extremely tiny stitches that I assumed it was machine done, and dated it as late nineteenth century. The chemise style was one that was used for many decades. But the microscope proved that the tiny stitches were done by hand, and the felled part of the seam was not even an eighth of an inch wide. The brodery Anglaise, and the style of the chemise showed that it could have been much older than I had first thought. For example, the armholes were shaped with gussets, one inside and one outside, to form the curve of the underarm.

Back to the present. The only time I ever had trouble with flat- felled seams was with a loosely woven linen fabric, out of which I made a jeans style jacket. I should have made false flat felled seams, but didn't, and the first time it was washed, it pretty much turned into a rag. So now it's false ones when using loosely woven fabrics.

Teri

Reply to
gjones2938

I haven't done a true flat fell seams for yonks, as I find it so much quicker to overlock the seam, press to one side, and stitch 6mm (1/4") on the outside. All my PJ's, nightshirts, etc have been done this way and NONE of the satin has frayed at all, this is a good test I feel.

Since I now own a CoverPro 1000 (3 needle) this gives further options.

Like you Taunto, nobody ever sees my clothes either, but I like to know they won't fall apart when I'm least expecting it!! LOL

Br> I've been flat felling the seams on my shirts since the outset. Always

Reply to
HC

Its the Belgian Military Chef's Jacket, Folkwear #133.

I think I just figured out the part I was stuck on.

"Press under 1/2 in/13 mm at bottom edge of Jacket. Turn again on Hemline and topstitch or slip-stitch pressed edge to Jacket."

I guess this had me bamfuzzled until now, though it looks so simple now.

I'm also dealing with fear from not doing a jacket before, so my head gets backed up easily.

duh-wite

Reply to
Taunto

Taunto wrote: > There's no more fun to it. Its tedious as all get out. I have a foot

I just realized what made me enter this turn of events regarding flat fells. This chef's jacket requires extensive flat-felled seams on its many seams. I'm using some very unravelly sueded poly, backed with some flannel for body and warmth. There's no way I can get this combination to roll under, so I just decided to become a conscientious objector.

Reply to
Taunto

Hm... That does sound rather older, doesn't it! Last year I was in the V&A looking at Tipu's Tiger, and one of the Indian coats in a nearby case was plain white muslin one... It was cloud fine cotton muslin, and had a hand rolled hem about an eighth of an inch wide. 75 METRES of hand rolled hem! The stitches was so tiny as to be almost invisible. It's dated to the mid eighteenth C.

There are still, in London, specialist stitchers who do nothing but hand worked buttonholes for the bespoke tailoring trade. The very thought makes my hands ache, but it is good to see that there's enough work to keep at least two in full time employment!

Argh, yes! Cut those seam allowances a tad wider, stitch and then 4 thread overlock, press sideways, top-stitch. The only other method to use to seam stuff like that durably on something that needs regular washing and is unlined is to hand stitch the whole shebang, using a particular Viking seam method that I need to look up again. I've seen it copied by re-enactors, and I'll have a hunt about and see if I can find it described or shown somewhere on line. It ends up looking like a sort of felled seam, but is stretchy... Great on bias cut areas.

Reply to
Kate XXXXXX

Ah, yes. You could just overlock that edge and turn it up once if you are doing this just for home consumption, but turning up the edge and then stitching it in place is just as quick. Press the first turning, press the hem turning, stitch. Takes but a few moments.

Running through it in your head a few times is always a good idea. I like 'bamfuzzled'. A true portmanteau word: both bamboozled and puzzled! :D

It's cloth. It has no brain cells. Don't let it get the better of you! ;)

You are doing fine, and once this project is finished, coats will hold no fear for you in the future. Gents natty suiting next! :)

Reply to
Kate XXXXXX

There are some places a felled seam just will not go. If you are mounting the outer cloth on the lining rather than sewing them separately, this is one of them! Serge and press and top-stitch: there are limits to insanity!

Reply to
Kate XXXXXX

I made that up for the moment. Seemed to cover it.

Income tax forms have no brain cells either.

Reply to
Taunto

I don't let them get the better of me either! I have boots on... ;)

Reply to
Kate XXXXXX

Dear Kate,

OHHH! Please tell me more about that Viking stitch. I don't think I know it, or know it by another name. I need to add it to my repertoire. Right now, I'm making a dragon for my middle grandson, who is moving to a big house with his own room, which he wants to have a medieval theme. I'm doing all the quilting by hand. I'm down to one wing and the feet.

Teri

Reply to
gjones2938

I cannot find any illustrations on the net, but there are mentions of various book on Stefan's Florilegium. This looks like the most comprehensive::

"Paul Norlund Meddelelser Om Gronland (Copenhagen, 1924) (or in English The Buried Norsemen at Herjolfsnes). It has excellent patterns, and comparisons of the different finds at Herjolfsnes (Greenland) and a good discussion of fibers, seams, finishing, mending, etc. There are flat patterns as well as sketches of the garments, and illustrations from ms. with similar garments."

There's a brief but useful note here, with details based on extant garments found in excavations:

formatting link

Reply to
Kate XXXXXX

Dear Kate,

Thanks for the references. I spent some time at the Vassar site. I think I understand some of the descriptions, and have used the faux french seam on occasion, but by machine.

Teri

Reply to
gjones2938

I'll try not to make any deductions from that.

Reply to
Taunto

Oh, arrr! I think I'd use *lap* seams for that, as if it were blanketing!

Joy Beeson

Reply to
Joy Beeson

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.