Poodle skirts - and - does anyone recognise this pattern !?

I told my wife I'd ask for her, so...

Is there anything hard about making a 50s circular poodle skirt? What I mean is, is there a simple way of making one by simply measuring the person's waist and/or height - that will then tell you what the bottom circumference should be (so you get that big circular spread)?

Also, could folks please take a look at this ebay auction and tell me if they recognise the pattern? I contacted the seller and asked for the number, but they didn't reply. I would just buy it, but it's not in my wife's size - so I now need the number to find it elsewhere.

formatting link

And before the self-appointed sewing police jump down my throat - don't bother:

  1. I'm in Australia
  2. The auction is in the USA.
  3. (In case you're really bad at geography - that means it's not my auction.)
  4. I am NOT advertising it - I want to BUY it - and need HELP to find it.
  5. Don't go whining to ebay claiming the poor person advertised in a public newsgroup - because they didn't - I posted a temporary, non-ebay link and specifically told folks here it was NOT for the reason of promoting it.
[mutter] It's ridiculous I should have to cover myself like this in a group of (mostly) mature adults. [/mutter]

Thank you (to the rest of you) for reading...

Allan.

Reply to
Allan
Loading thread data ...

Easily found at

formatting link
It's 5041.

Cathi

Reply to
Lee & Cathi Thomas

It's a circle. The final hem circumference is determined by the waist size and the length of the skirt. Take the waist measurement, add an inch. Take a large piece of paper (newsprint is good for this). Draw a quarter circle in one corner (centered on the corner) with a radius of the waist measurement divided by 6 (it's an approximation - you can do the real math if you want, but this is close enough). Measure down from that line however long you want the skirt to be. Draw another quarter circle that far away from your first line. Viola -- circle skirt pattern. (You could do it directly on the fabric if you wanted to. Just remember to cut a waistband.)

Links with pictures:

formatting link

You'll probably have a hard time finding it, as it's an old Simplicity pattern that's been out of print for a number of years. Someone may have it in their stash, though (I don't).

-- Jenn Ridley : snipped-for-privacy@chartermi.net

Reply to
Jenn Ridley

Whoa, turn off the paranoia machine!!! ;-)

If you look in the Simplicity catalog online

formatting link
and put 5403 in the search box, et voila. This pattern includes the appliqué for the poodle, but if you don't need that, you can easily do the math for a full circle, starting with the person's waist size and measuring out to the finished hem length. If you're making it of felt, no need for a hem.HTH,

Beverly

Reply to
BEI Design

For an elastic waist I add about 2: to the HIP size to get the cutting circle circumference for the waist, so it slides up over the hips easily. Once I have that inner circle measurement, I just add the length I want plus hem to the bit of string, and draw on the fabric!

I just hope you don;'t want it for re-enactment stuff - it's one of the least accurate patterns ever made! ;) I recognize it - it's been out of print for a while. Try Grandma's House - it's on this page in several sizes:

formatting link
Scroll down - there's a lot on the page!> > Thank you (to the rest of you) for reading...>

Reply to
Kate Dicey

Except that it is

formatting link
just so you get to the right webpage, which I didn't the first try.

Dannielle

Reply to
Dannielle

Go to

formatting link
and look for the circle skirt tutorial. To make it pouffy you would have to wear a petticoat or something.

HTH

Michelle Giordano

Reply to
Doug&Michelle

I bought a circular skirt pattern out of the "costumes" section just last year........can't remember if it was Simplicity or McCalls..........made my GrandD a 50's outfit.............

Reply to
Pat in Arkansas

I made 16 a couple of years back for a wedding... No pattern involved, just a pencil and a bit of string.

Reply to
Kate Dicey

Sure, if you are good at geometry.

Reply to
Melinda Meahan - take out TRAS

Allen, if your heart is set on that pattern (despite Kate's warning), the seller has three copies of it, in sizes 10-12-14 eBay #6264509071, and sizes 16-18-20 eBay #6615245449. The seller will ship worldwide, according to the listing. HOWEVER, that seller's feedback is not sterling, so be very careful. There are reasonable explanations for the

4 negative feedback, but 4 people were not happy. On the other hand, the seller takes Paypal, and with a credit card, you have good protection.

Or find another source. Or another pattern, as Kate suggests.

Reply to
Pogonip

However, since OP is looking to make a "50s circular poodle skirt" he may need the poodle appliqué pattern, too.

Beverly

Reply to
BEI Design

Take one poodle...

Sit poodle on fabric - draw round!

Or hunt up a poodle picture on the net...

Reply to
Kate Dicey

Ah, but Kate, the "50s poodle skirt" had a very particular *kind* of poodle, at least in the USA. ;-)

I made one for my dear niece for 50s-dress-up-day at school a few years back, and she was the envy of her sophomore class. Pink felt skirt, gray felt for the body and fake fur for the fluffy bits, sequins for the collar and leash. And I made a matching bolero top, with a tiny poodle on the back.

Wish I had a picture.

Beverly

Reply to
BEI Design

Should that not be 4? I'm no math major, but if you're drawing 1/4 circles...

HTH

--Karen D.

Reply to
Veloise

Radius, not circumference.

Circumference is the length of the line (the waistband); the radius is how far from the corner you draw the line to make it be the right length. (aka, the length of the string/tape measure.)

I used an approximation (the proper math would be a quarter circle with a radius equal to the circumference divided by 6.28 (pi times

2).)

-- Jenn Ridley : snipped-for-privacy@chartermi.net

Reply to
Jenn Ridley

Watch out - you'll get censored too! : p

Reply to
Allan

Thanks - I'll have a look. I guess I was thinking more along the line that there must be a mathematical formula - trig and pie, etc. to get the correct length, angles and circumference.

Reply to
Allan

Great stuff - thanks!

What's the added inch for? Seam allowance??

Reply to
Allan

Heh - not paranoia, as the other thread now shows. ; )

Thank you.

Reply to
Allan

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.