the guide to make a pattern from RTW ?

I recall some time ago (1-2 yrs) that someone had posted a link or info about making a pattern from RTW garment or maybe it was about grading ??? i can't remember.

Does anyone have a link to a how to make pattern from RTW clothing without ripping it apart ? Or even a how to on increasing the size of a smaller pattern to larger one ?

Prob: have a many pairs of 2T shorts that my now 3T DD does not fit in but they were great fitting comfortable shorts.

I ripped the 2T apart in hopes of making a larger pattern but the shapes and number of panels makes it difficult for this amateur.

These shorts have 7 pieces ; F/B and L/R panels, Rear L/R top Yokes (that encapsulates a elastic 1/2 waist), a front waist band, front faux fly.

Too many pieces for me and some of the edges are curved even after i pressed them crisp and flat.

thanks for any help, robb

Reply to
robb
Loading thread data ...

Is this it?

formatting link

Reply to
JAX

That's a god article but I don't think it will solve your problem completely. I would Iron fusible interfacing to the pieces you have and add 1 inch for seam allowances. Pin one side together on the right side, pins facing down, then have her slip it on and make the adjustments this way. Center the the back and front on her back and front. If they don't reach release the side seam pins and pull the centers of the pattern to her centers. If you need to add to the pattern measure and add tissue to make up the difference. If you need to add length to the body, draw a line straight across the back and front above the crotch and below the zipper or fly front. Be sure to add tissue to each piece to the sides of the side seams on the yoke in the same amount. re-pin your pattern to the child as before and have her try it on again and fine tune. You can also do this by fitting the entire new pants pattern the same way if you want . I hope that clear if not come back and I'll try to clarify for you. I'm sure someone else will also have suggestions so look at everything and let us know what works for you. Juno

Reply to
Juno B

formatting link

Thanks JAX, That is not the one i thought i remebered but that looks like a good article. I'll see if those instructions and the "earlier article" help.

Thanks for the helpful reply, robb

Reply to
robb

formatting link
Robb,

problem

1 inch

pins

this way.

don't reach

to her

tissue to

draw a

below the

sides of

pattern to

tune. You can

way if you

clarify for you.

everything

Thanks Juno,

Another trick for the "Bag'O Tricks" :)

I'll have to try that out and see if i have more questions.

Thanks for the idea, robb

Reply to
robb

for Real People from Palmer and Pletsch. It's a great guide to fitting pants. Just a reminder that you add equal amounts on the sides but not to the center seam. That's because you line up the center of the pattern to the center of the body. Juno

Reply to
Juno B

FWIW, "making bigger" is a function of grading, but with pants, you usually just need to split the pattern on the center front and center back of the leg, clear to the waist, and add the same amount to front and back. And a little length. A crotch curve that fits well will usually hold up to at least one size up, and sometimes to two sizes up.

formatting link
Kay

Reply to
Kay Lancaster

If you try my way I forgot to say ttie a piece of elastic around her waist to hold up the pattern while checking the fit Juno

Reply to
Juno B

in

you usually

back of the

back. And a

up to

formatting link
formatting link
ference-for-cut-and-spread-pattern-grading>

Thanks Kay,

For the info, help and links.

robb

Reply to
robb

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.