Latest threads in Woodturning Craftsshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Badger Shaving Brush Knots
Has anyone turned a Shaving brush handle? I'd like to find a supplier for the knots (or plugs) of Badger Hair to glue into the turned handles. I found one supplier but price seems high. Thanks! Pete
20
|
17 years ago
|
20 | |
|
Suitable wood for saucepan lid handle
Hi, I'm in the UK and have been wood turning for about four years now. Over those years I've lurked this group on a regular basis. I need to replace the handle/knob off a saucepan lid and was...
3
|
17 years ago
|
3 | |
|
any health hazards with ebonizied oak bowls
I used vinegar after soaking steel wool in it and it created a nice color on a little oak bowl now used for wrapped candy. Has anybody heard of any health problems from ebonizing an oak bowl using...
7
|
17 years ago
|
7 | |
|
Delta lathe problem
I am a fair to average wood worker, but fairly new at turning. I picked up a used Delta 46-700. It appears to have a runout problem that gets worse with weight on the spindle. I bought a new Barracuda...
3
|
17 years ago
|
3 | |
|
Homemade Oneway Lookalike lathe
Quite a while ago I saw a website where a guy (with the help of a frind who happens to work in metal fab shop) built a oneway looalike lathe. The process was fairly well documented and described. I...
7
|
17 years ago
|
7 | |
|
Night Stands
My current project is a bedroom set, I'm working on the night stands right now. you can see what so far at , I haven't made very many drawers before and I'm undecided which way to go, cause I'm...
—
|
17 years ago
|
— | |
|
But By The Third Piece ...
But By The Third Piece ... Lately I?ve been turning three, four or ten pieces from the same piece/chunk of wood. Not 14? diameter plates or 14? tall hollow forms of course, but smaller stuff - weed...
2
|
17 years ago
|
2 | |
|
Frozen green bowl turning
I just started experimenting with green bowl turning and have researched techniques on this site, which has been helpful. A thought crossed my mind (it didn't take long). With the temps down to single...
10
|
17 years ago
|
10 | |
|
Tidying Up
Hi! Does anyone out there have any neat ideas for collecting shavings from under and around a lathe which might make the end-of-day tidy-up a bit less of a chore? I have a shelf (well, actually a...
7
|
17 years ago
|
7 | |
|
Newby - ? about precedure
I am taking a bowl-turning class at a high school. So far I have made 2 bowls and a plate. There is one class left; I would like to make a cup, basically a cylinder with a little radius at the bottom....
3
|
17 years ago
|
3 | |
|
Vicmarc mini lathe+ For Sale!
Hello all, I posted this about a week ago and have now lowered the price and added several accessories. Including a drill chuck, two chisels, and a Delta grinder. Almost everything you need to start...
6
|
17 years ago
|
6 | |
|
spindle turning without adding to the bed
I need to turn just a couple legs for a small table I'm trying to repair. The problem is the bed of my lathe is not long enough. I could add a bed extension but that would require building a new stand...
3
|
17 years ago
|
3 | |
|
Oops! 2 J-Line J-170's
I wasn't paying attention and thought I was buying 2 Powermatic 90's for $200 ea., and wound up with two Brodhead Garrett J-170s for $400 ea. ooch. Anyway, the casting is a lot heavier than my Grizzly...
4
|
17 years ago
|
4 | |
|
Nova Precision Midi Chuck Woodcraft $69.95
The 1x8 only. Just went to the Woodcraft site to look for something and saw that and forgot what I was looking for. -- --John to email, dial "usenet" and validate (was jclarke at eye bee em dot net)
—
|
17 years ago
|
— | |
|
craft show
On March 17th, 2007 the Texas Sugar Land Lions Club will present an indoor Arts & Craft show free to the public. We are accepting applications for this event from qualified crafters and media artists....
—
|
17 years ago
|
— |