I sometimes end up with pumps that I can't sell because there is something wrong - one of these was a Thomas 1/3 hp dual wobble piston pump with bad bearings - well, I finally got annoyed and bought new bearings so now that part is fixed, but it still doesn't draw a good vacuum because the rings are worn - Thomas sells a kit for the pump that includes new pistons and sleeves for $125, but if I buy it and put it in, then I'd have too much invested in the pump.
So, for anyone who would like a nice 110V vac pump (this is the same model pump I used for a long time on my lathe) - here's a deal - pump, as is (with the new bearings) $45. You can order the kit and put it in yourself, or I can give you the contact info and you can have the kit delivered to me and I'll put it in for you and then send you the pump.
if that strikes your fancy, just drop me a note by finding my email address on my web page (below) ... don't reply to the address in this posting, it's an invalid address I use to reduce spam.