What makes it darker/Ligher/colored?

So here I am at work and thinking about a bowl I have on the lathe back home. Last night I finished the outside, did a spot of sanding and then slathered on the Danish Wood oil. I use the clear/natural one and wondered, what ingredient in the others gives them color? If I recall I've seen walnut and cherry. Certainly there are other colors but still, what gives em the color?

Reply to
Kevin
Loading thread data ...

On Mon, 18 Oct 2010 12:27:42 -0500, Kevin wrote (in message ):

Assorted dyes and stains of one kind or another, will darken what might otherwise be a clear finish.

In the case of shellac, which is made from lac bug squeezins (actually an exudation from the bug, used for making bug tunnels and such) the color comes from the color of the bug resin used in making the finish. The solvent is alcohol.

Some finishes may used various oils which can have a characteristic color. Straight tung oil can be an amber color. Some natural varnishes used various kinds of resin which had a characteristic color, and the vehicle was usually an oil like linseed oil and a volatile solvent like turpentine. These ingredients all lent their own natural colors to the final finish.

Modern synthetic finishes can be easily dyed with aniline dyes or other kinds of synthetic coloring agents, whether a liquid or a fine soluble powder.

Various water-soluble finishes can be easily colored with acrylic pigments, in nearly any shade you desire.

Depending on the shade or color of your final finish compared with the shade or color of the underlying wood, the results can be disappointing if care is not taken to get an even application. Results can be streaky or showing curtained effect. (don't ask how I know)

Interesting metallic effects can be had with finely powdered metals, mixed with a suitable varnish or other hard drying finish. Again, depending on how the stuff is mixed, results can be less than what you had in mind.

tom koehler

Reply to
tom koehler

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.