blanket stitch with serger information needed

I own a New Home Serger and was told it is possible to do the blanket stitch with my machine. I stopped @ a dealer and was told it is done using only one needle but, they were not familiar with how it is done . Does anyone know how I could possibly use my Serger? I wanted to do the blanket stitching around baby print ,fleece blankets. I do not like the Serger only finish look, since I sell things for gift giving.

Reply to
DaveS
Loading thread data ...

I just finished taking a Huskylock serger class. No matter what machine you have you'll never know enough not to learn something new, better, faster, etc. The way we made a BEAUTIFUL blanket stitch, if I can explain......that's the best part about a class, you actually SEE it done......first get some Solvey type stabilizer (med to heavy) and cut into about 3/4" strips. I use medium weight. Set your serger up (remove right needle) to left needle - wooly nylon, lower looper - cotton, Differential-normal, stitch length 5, stitch width 7, tension-left needle 0, lower looper 7. These are the settings I start with to run a test before fiddling, your machine may have different settings but this should give you a bit of an idea. Lay the stabilizer strip on top of the edge fabric as you sew through the serger (using the cutting blade, don't roll it). When you have finished hold the fabric close to the serged seam with your right hand and pull the stabilizer (should be on top) firmly with your left hand. This will pull the threads about to make a blanket stitch that is very nice looking. I have used contrasting wooly nylon and cotton thread to match the fleece. Then you can wash or do whatever method you choose to remove the water soluble stabilizer. Tear away is a PITA to remove unless you are into tedious tweezer work and if you are using fleece I'd give a test run if you try Heat-Away

Like I said, those are the settings I use on my Huskylock 905, your mileage may vary but the technique would be pretty much the same.

Val

Reply to
Valkyrie

val- thank you for such a great description! i have an older huskylock (i purchased used on ebay....) but i am going to give this a whirl!

betsey betsey "we do not inherit the earth, we caretake it for our children"

Reply to
Two x over

WOO-HOO! I know this is a realllllly old post, but it's exactly what I needed. I have a 936 still going strong

Reply to
ThimbleThings

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.