hi can anyone help I have a janome 300e and have a large design that in DST format that i wish to multihoop and sew out on the 300e. I have buzz edit v2 but when i convert the design to JEF i cannot find a hoop size big enough to multi hoop or work out how to do it. would appreciate any help i can get Thanks Wayne
I believe you will have to split the design into several sections that will each fit in the Janome "B" hoop and figure out how to line up those sections. If the original design will fit in the "Giga-Hoop", you might be able to split it into sections, then combine them using Janome's Easy Giga Hoop program, which is part of the Customizer 10000 package.
gwh
G'day
I'm not familiar with Buzz Edit but wondering if it has a 'Custom' hoop option?
Do you have a Clothsetter? this makes rehooping a breeze, although it can still be done with the plastic grid template that came with your hoops.
I prefer to use Embird, which is available for a 30day (or 100 use) free trial, this will do all you want too.
Wayne's suggestion of a GigaHoop is another good idea...if you have one?
I'm about to do a huge design on the back of a shirt, it will need 4 x hoopings of the B hoop, sounds something like yours?
Bronwyn ;-)
H> On 15 Jun 2006 02:22:00 -0700, snipped-for-privacy@aol.com wrote: > >
InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.