5 discussions on InspirePoint about the Delta LA200: what owners asked, what went wrong, and what fixed it.
I am new to turning and am currently looking at three lathes available here in Canada in my price range and am seeking advice from any and all who have experience with any of these models. King Canada KWL-1016C General International 25-100M...
Long time since I've posted here but been doing a lot of lurking in the background the past year. Had a flood last year and thought I had everything in the shop rebuilt / cleaned-up / tested and repaired....well almost. Had not used the...
I bought a Delta LA200 midi lathe and thought I'd be safe since it was in a sealed and strapped box. But apparently, someone had opened the box and made off with the spindle screw in the tail stock before carefully repacking and...
I am in the research phase of my latheing experience and wouldappreciate any opinions of the Delta Midi Lathe that I am considering.I plan to turn mostly bowls and small spindles and would this lathe fitmy needs. Your input is...
A few months ago, I acquired a Delta LA200 midi lathe and after taking a one day course and watching a lot of you tube (and spending nearly the cost of the lathe on a chuck, a press, drill bits, etc.) started turning pens. And...