Hollow red earthenware moose inspired by stone age carvings

Nov 19, 2026 Last reply: 3 hours ago 4 Replies
Jump to replies (4)

When finished, this piece is a hollow moose built from red earthenware, pictured by the maker as a mother moose. The flanks carry a stamped kurbits floral pattern in the Swedish folk art tradition, and the whole surface is burnished to a smooth, compact sheen. The figure draws on stone age moose petroglyphs found in Sweden, and the maker has noted that the red of the earthenware brings to mind the red paint often used to fill in such carvings.



The construction is worth studying. The body and legs were roughed out solid first, then the torso and neck were sliced open with a craft knife and hollowed out with wire loop trimming tools, which the maker explains guards against cracking during firing. A drawn paper template served as the reference for the form, and plastic wrap kept moisture on the extremities while each section was worked. Cut sections were rejoined with liquid clay slip, and hand-formed ears were scored, slipped, and blended onto the head.



Several details stand out to me. Wooden shaping tools, ribs, and a metal spoon smoothed the seams, small texturing implements stamped and detailed the pattern, and an agate stone tool plus a spoon burnished the leather-hard exterior. The finished piece was filmed outdoors on mossy terrain, which suits the subject well in my view.



One open question remains: the petroglyph site is named as Näsåker in one place and Nämforsen in another, so the exact location is unclear. The moose itself has been sold, which says something about how the work landed.



Project by Nymla. Watch it on their YouTube channel:

formatting link


I would love to know how the hollowing was actually done on a figure this shape. Was the whole torso opened up at once, or did the maker work section by section? And how did the legs and ears stay workable while the longer hollowing took place? The finished form looks so seamless that I cannot spot where the cuts were made.

Building the figure solid first and only then cutting it open seems like the clever part of this build to me. It lets you get the proportions and gesture right while the clay is fully supported, and the hollowing afterwards removes the mass that would cause trouble in the kiln. The trade-off is that you have to rejoin the sections cleanly with slip and blend every seam, which is real extra work, but the payoff in firing safety looks worth it.

A smaller companion figure could be a nice variation on this build. The paper template method seems like it would scale down well for keeping proportions consistent, and the stamped kurbits pattern could be compressed onto a smaller flank with the same texturing implements. Burnishing a smaller surface with the agate stone would also go faster. A pair of figures would echo the mother theme without duplicating the original.

The maker has explained this one. The body and legs were roughed out solid, then the torso and neck were sliced open with a craft knife and hollowed out using wire loop trimming tools, specifically to prevent cracking during firing. The cut sections were rejoined with liquid clay slip, and plastic wrap kept moisture on the extremities while each section was being worked. The piece was then fired in an electric kiln.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required