Cutters Mate

I cut Bullseye glass. I cut 1/2" x 20" strips as well as many 4x4's

5x5's. Will the cutters mate cut straight and precise measured sizes? I also would like to cut circles up to 15". Would you recommend the cutters mate for these applications? Which one would be best for me? What attachments would I need to accomplish both of these tasks. I cut glass every day so I am also looking for something with a good life span.

Thanks Shawn

Reply to
michasiow
Loading thread data ...

Get a Morton system for the straight cuts.

formatting link
are many good circle cutters on the market.

Reply to
nJb

you need a strip cutter. there's one (albeit very expensive) in the bullseye catalog.

the cutter's mate isn't a strip cutter.

Reply to
Charles Spitzer

What Jack said. As for a circle cutter, get a Fletcher...suction cup is the best. However, I have found that for most Bullseye, the suction cup doesn't get a good suction so you will have to hold the suction cup as you turn the arm...but still good nonetheless.

Andy

formatting link

Reply to
neoglassic

What Jack said. As for a circle cutter, get a Fletcher...suction cup is the best. However, I have found that for most Bullseye, the suction cup doesn't get a good suction so you will have to hold the suction cup as you turn the arm...but still good nonetheless.

Andy

formatting link

Reply to
neoglassic

I was trying to remember the name of my circle cutter. The suction cup is great.

Reply to
nJb

I'll second (or third?) the recommendation for the Morton grid. Great for all kinds of straight cuts.

Reply to
Steve Ackman

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.