Vintage monogram garment bag turned into wallets

Nov 16, 2026 Last reply: 4 hours ago 3 Replies
Jump to replies (3)

The hardest part of this build is not the leatherwork, it is the legal cloud hanging over the material. The maker received a cease-and-desist letter from Louis Vuitton, addressed to the leather business and dated October 12, 2018, and the project opens with that letter shown framed on the wall. Rather than drop the idea, the maker upcycles a vintage monogram garment bag into wallets and small leather goods, and presents the whole thing as a guide to what to avoid when repurposing designer items.



The construction is straightforward and disciplined. A flat panel is cut from the garment bag, then steel rule cutting dies from Texas Custom Die are laid over the canvas so every logo sits centered and unsevered, following traditional pattern rules. A Buckleguy manual clicker press punches out wallet pockets and a keychain blank. The cut canvas is glued with contact cement onto Walpier Buttero natural vegetable-tanned lining, and the laminated panels are then die-cut in turn.



The finishing details stand out to me. Margin lines are scored first, and stitching holes are punched along the upper pocket rims with 3.85 mm pricking irons and a wooden-handled maul on a black punching pad. A maker's mark is stamped into the leather using a debossing stamp reading 'MADE ON CAPE COD', and an NT utility knife does cutting duty along the way.



One thing stays open: the stated purpose is unclear, since the description is heavily ironic, joking that Louis Vuitton is a small artisanal business that does not depend on branding and that the maker will not make their own wallet. In my view the finished wallets make the argument better than any description could.



Project by Corter Leather. Watch it on their YouTube channel:

formatting link


The die placement is the choice I keep coming back to. Laying the cutting dies over the canvas so each logo stays whole and centered, the way traditional pattern rules call for, is in my opinion the right call for monogram work. It surely demands more thought than free placement, but a severed motif would cheapen the whole wallet.

How does the maker keep the laminated panels from creeping when they go under the clicker press after gluing? Canvas glued to vegetable-tanned lining with contact cement seems like it could shift during die-cutting, and I am curious whether the panels are pressed, weighted or cut one at a time to keep the monogram aligned.

Since a keychain blank is already being cut from the same canvas, I would love to see a matching card case added to the set. The logo-centering rules are already worked out for small pieces, so extending the pattern to one more compact item would cost little extra planning and would give the upcycled garment bag a fuller second life.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required