Hand-sewn Swiss military satchel reproduction worth a look

Nov 15, 2026 Last reply: 3 hours ago 2 Replies
Jump to replies (2)

The starting point here is lovely: a vintage Swiss military shoulder bag appears in an opening clip, and James Berry - LeFrenchCrafter decided to reproduce it by hand, entirely as a gift for the person who owns the original. Once filming was done, the finished satchel was packed up and sent straight to that person. A reproduction built purely to hand over to its inspiration is a rare kind of project, and it shows in the care taken throughout.



The construction is thorough. Paper templates were taped straight onto the hide and cut out with a vintage C.S. Osborne strap cutter, a metal straightedge and scalpels. A groover and a French skiver recessed the edges and fold lines, which were thinned down to form precise 90-degree box corners. The leather is vegetable-tanned Niagara from the Radermecker tannery, over 3 mm thick and treated with tallow, paraffin and beef fat, stitched with 0.4 mm cream Meisi linen thread and bonded with neoprene cement before saddle-stitching.



Plenty of details stand out. Embossing stamps were customised on a Bambu Lab P1S and pressed into water-cased strips with a manual screw press. Hardware covers D-rings, double-cap rivets, a LOXX mechanism and a German-made locking fastener set with a red bench press. Edges were trimmed, bevelled and burnished with Tokonole, then the whole bag got a Saphir Crème Surfine wax finish. Even packing was considered, wrapped in linen cloth and bubble mailers.



The one trade-off is that all this effort now lives with someone else, since the bag was given away after completion. A printable A4 pattern and guide exist for anyone who wants their own.



Project by James Berry - LeFrenchCrafter. Watch it on their YouTube channel:

formatting link


The choice to thin the edges and fold lines down before folding is what makes those crisp 90-degree box corners possible on leather that thick, and in my view it is the smartest move in the whole build. Skipping that step on 3 mm stock would leave bulky, gappy corners, so the extra skiving work pays for itself in the final shape.

Since a printable A4 pattern and guide already exist, one variation worth trying would be a lighter weight leather for anyone who finds the full 3 mm hide tough to stitch by hand. A thinner hide would need less recessing at the fold lines and would saddle-stitch faster, while keeping the same panel layout, hardware set and box corner construction of the original.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required