Help Program / Thread tension/Tutorial/Creative Consultant 51
Help screen/Functions · the screen offers the following information: · name of the function · explanation · brief listing of main applications
Note The Help program can be opened at any time without affecting the work at hand.
Back to previous screen · touch esc · Help is closed · the previous screen appears
Thread tension
Basic tension settings apply automatically when a stitch or program is selected. The tension is factory set for best possible sewing results using a 100 weight, 3 ply polyester thread (100/3).
The tension may vary when using other types of thread such as embroidery thread, and it may be necessary to adjust it to suit the fabric and stitch type.
Changes can be made to the tension of any stitch without affecting any other stitches. To do this, the tension function is accessed with the external TTC button. It can also be placed as a function on the toolbar on the lower part of the screen and accessed directly from the screen (see page 26).
TTC button · press the external TTC button
· menu appears · select Thread Tension · thread tension screen appears
tering the tensions · the perfect stitch formation is shown in the center graphic · the basic value is indicated by the bar on the scale · touch the arrows up or down to alter the tension: touch the up arrow if the stitch formation looks like the top example ↑= need tighter upper thread tension (the upper thread is loose which allows it to be pulled further through to the underside of the fabric) touch the down arrow if the stitch formation looks like the bottom example ↓= need looser upper thread tension (the upper thread is tight which pulls the lower thread further through to the top of the fabric)
· the tension alteration affects only the selected stitch and does not remain saved when the machine is off
Save and close · touch OK to confirm the change and return to the stitch screen
Back to basic settings · touch reset to return tensions to the basic settings
52 Thread tension/Tutorial/Creative Consultant
Tutorial
In computer language, tutorial means self-help. The tutorial provides concentrated on-screen information about various aspects of the machine.
External TTC button · press the external TTC button
Menu · the following menu appears: · Thread tension · Tutorial · Creative Consultant · touch Tutorial
Subjects · the Tutorial sub-menu appears: · Beginning to Sew · FHS system · Help · Tips and Tricks · CPS · Embroidery module · Embroidery Software · touch to select the desired subject · touch OK to confirm · to change subjects, touch esc to return to menu
Information · a clock on the screen shows that the computer is searching for the desired information · information about the subject of your choice appears on the screen · touch esc to close the screen and return to the menu
FHS (Free Hand System) presser foot lifter
- the presser foot lifter raises and lowers the presser foot
- insert the presser foot lifter into the opening in the base plate
- press the presser foot lever to the right to raise and lower the presser foot
- the feed-dog is lowered simultaneously
- the feed dog is raised as soon as the first stitch is sewn
Creative Consultant
The Creative Consultant provides information and help for a variety of sewing needs.
After entering the type of fabric and technique you wish to use, the Creative Consultant provides suggestions regarding needles, presser feet, interfacings, special settings, etc. The suggested presser feet are not necessarily standard with the machine but may be special accessories which can be obtained from your BERNINA dealer.
The Creative Consultant automatically sets the correct thread tension for the type of work selected.
External TTC button · press the external TTC button
Thread tension/Tutorial/Creative Consultant 53
Menu
· the following menu appears: · Thread tension · Tutorial · Creative Consultant · touch Creative Consultant
Fabric menu
· 3 columns of fabric types are displayed · light-weight fabrics · medium-weight fabrics · heavy-weight fabrics · the most commonly used fabrics are listed in the three columns · if the fabric you wish to use is not listed, select a similar type of fabric · use the arrows to scroll up and down for all choices · touch to select the desired fabric · touch OK
Techniques menu
· several common sewing techniques appear on-screen: · Seaming · Overcasting · Topstitching · Buttonhole · Zipper · Decorative work (decorative stitches) · Machine quilting · Freemotion machine quilting · Appliqué · Sideways motion patterns · touch to select the desired technique · if the technique you want to use is not listed, select a similar technique · touch OK to confirm and move to the information screen
Information, special suggestions, thread tension
· the screen displays settings and suggestions for the type of fabric and technique you have chosen: · Presser foot number(s) · Needle size and type · Feed dog position · Thread tension · Presser foot pressure · Stabilizer needed · Special suggestion · the tension is set automatically (auto appears) · there may be several suggestions for the presser foot and needle type · some presser feet suggested may be special accessories which are particularly suitable for the chosen technique (they may not be standard accessories, but can be purchased separately) · select the presser foot and needle according to your particular wishes and preferences · a stabilizer will be suggested if it is required to suit the technique and fabric · provides a reminder to use button-hole cord (gimp) if necessary to reinforce a buttonhole
Back to selected stitch
· touch OK to confirm · the machine will automatically go to the appropriate practical stitch screen with the correct stitch and tension setting automatically selected · if decorative work was selected, the machine will go to the first screen of decorative stitches with stitch 101 selected · sewing can begin immediately · the suggested stitch can be changed at any time
54 Smart Function
Smart Function
Sometimes you have to interrupt a task at hand to complete another piece of sewing which must be done before you can carry on any further.
The Smart function was designed specifically for the purpose of "remembering" the machine's current settings so that you can return to them later.
The screen in which you are working with all the settings you made can be saved and easily re-opened.
Saved settings in the Smart Function are lost when the machine is turned off.
Application
· you have created and stored something in memory · you have tested or completed some of the work · you plan to finish at a later time
Saving the screen with the Smart Function
· press the external Smart button · the screen, complete with all the settings (stitch, functions, memory etc.) is saved
Second Task
· switch to any appropriate stitch menu for another task · complete this task
Smart Function – back to screen
· press the external Smart button · the original screen appears · all settings are exactly as you left them and you can carry on with your original task
Setup Program
The Setup program allows you to personalize the screen to suit your own requirements and preferences.
You can change basic settings permanently and program the F (Favorite function) button on the head frame (above the needle). There are numerous possibilities – check the headings and decide what you want to do.
All changes made in the Setup program will be saved, even when the machine is turned off.
The machine can be reset and returned to the factory settings at any time.
Setup
· press the external Setup button · the menu appears · you can alter any of the features listed
· the original settings can be reset at any time
Menu
· the menu lists all those features which you can alter to suit your requirements: · Personal Program · Functions · Stitch length/width/needle position · Beeper · Motor speed · Thread tension
· Start screen · Return to basic settings · Sewing light · Service · Screen Contrast · personal settings remain saved even when the machine is turned off · the machine can be reset to its original settings or reprogrammed with desired settings at any time
Functions in Setup
This functions are found in the set-up program of the artista sewing machine. They are accessed by pressing the external set-up button on the front of the machine and then touching Functions on the screen. These functions are used when personalizing the screen to your requirements and preferences.
Pers. Pro.
Personal program · touch Personal program · your Personal program is activated · this function can be programmed in the Setup program
Application: · move this function to the toolbar for a fast way to access your Personal program
reset
Back to basic settings · touch reset · all changes in the Setup program are returned to basic settings
Delete functions
· touch arrow · removes functions
Insert functions
· touch arrow · inserts functions
56 Setup Program
Personal Program
Use the Personal program to design a screen with the stitches you use most often. Whether it is made up of stitches for a certain type of sewing, such as heirloom or garment, or just your favorite decorative stitches, this screen will make it easy and quick to sew any project.
When inserting stitches into the Personal program, variations (different stitch widths, stitch lengths, and needle positions) of all stitches may be entered into the Personal program.
Directional stitches and motifs and alphabets cannot be stored in the Personal program.
Setup
· press the external Setup button · menu appears
· touch Personal Program · Personal Program screen appears
Personal program (programming first stitch) · straight stitch always appears as the first stitch · personal selections can now be entered in the "empty" screen
Inserting stitches · press the Practical stitches external button · select Honeycomb stitch (stitch 8)
Personal screen · the screen changes to the Personal Program · Honeycomb stitch appears · touch store to save the stitch in your personal program · when a new stitch is programmed, it will be inserted automatically after the last stitch
Setup Program 57
Inserting the second stitch · press the external buttonhole button · touch the round buttonhole (stitch 54)
Personal screen · screen changes to personal program · the round buttonhole appears on the screen · touch store to save the buttonhole in your personal program · continue programming in this manner until all desired stitches are selected
Personal program (additional stitches) · the top row of five spaces is occupied · the 6th stitch appears in the next row · you can program as many stitches as you want in the personal program · if more than 15 are programmed, the arrows can be used to scroll the screen as in the standard program
Ok
Save and close · touch OK · screen closes and Setup menu appears · touch esc to close
· returns to the last stitch screen opened with the last selection still highlighted
Pers. Pro.
Personal program function · to open your personal program, the Personal Program function must be inserted in the function toolbar (see pages 59–60)
F
Favorite function · for even easier access, your personal program can be programmed into the Favorite function button
located on the frame of the machine above the needle (see page 59–60)
58 Setup Program
Deleting stitches from the Personal Program
Setup menu
· press the external Setup button, menu appears · select personal program
Personal screen
· personal screen appears · select stitch to be deleted (will be highlighted)
Delete the stitch
· press the external clr button
Stitch deleted
· the stitch is deleted and all remaining stitches move back one space · touch store to save the changes
Close
· touch OK · the screen closes · Setup menu appears
Programming functions
Setup menu
· press the external Setup button · menu appears · touch Functions
Functions screen
· all functions available appear on the screen · the bottom two rows of functions are the same as those that are active in the practical stitch screen (includes functions that may be hidden on the stitch screen) · these functions can be used in any screen · all functions in the lower rows are active · the upper two rows of functions correspond to the lower functions · the arrows in the center row are used to move functions
Removing functions
· select Motor Speed in the lower two rows · touch the up arrow · the function disappears from the lower rows · the function has now been transferred to the upper rows and will no longer appear on individual screens, such as the practical stitch screen · the function is highlighted in the upper rows and has been deactivated (removed) from the lower ones · move and deactivate other functions in the same way
Insert function
· a removed function can be reinstated at any time · select Motor Speed in the upper rows · touch the down arrow · the function is moved to the first position in the function toolbar in the lower rows · all other functions move one space to the right
Insert new function between two existing functions
· a new function can be inserted between two existing functions · select a function from the upper rows · touch the position in the bottom rows where you want to insert the function · touch the down arrow · the function will be transferred to the selected position · the replaced function (the one you selected) and all others will move one space to the right
Program F (Favorite Function) button
· select any function (including the Personal Program) from the top two rows · press the external F button (above the needle) · press the down arrow · the F button is now programmed
60 Setup Program
· the programmed function is displayed on the screen to the right of the needle stop position symbol
· it can be reprogrammed in the same manner as often as you like
reset Return all functions to basic settings · touch reset · all functions will be returned to their original positions except the Favorite function button on the head frame
· to reprogram the Favorite function button, follow the same steps · the new function will replace the old
ok Save changes and close · touch OK · changes are saved · screen closes · Setup screen appears
Changing basic settings for stitch width, stitch length and needle positions
Open Setup
· select stitch for which you want to alter the width, length, and/or needle position
· press the external Setup button
· menu appears
· select stitch length, stitch width, needle position
Changing the settings
· the stitch width, length and needle position screen appears
· alter the stitch width and length settings using the external controls
· alter the needle position with the external buttons
· touch OK to save
· to return to basic settings, touch reset
· touch esc to close Setup and return to the last selected stitch screen
Beeper
Setup menu
· press the external Setup button, menu appears
· touch Beeper
· beeper menu appears
Setup Program 61
Audio signals
· audio signals can be applied to the following: · stitches · functions · feed-dog raised/lowered (for embroidery) · upper thread control · bobbin thread control · position of presser foot (for embroidery) · bobbin winder · embroidery end · audio signals can be turned on and off · the number of repeats can be selected · the number of beeps can be set at 1, 2, or 3
Adding a signal
· select desired item from the menu · touch on · touch the number pad until the number of beeps you want (1, 2, or 3) is highlighted
Deleting a signal
· select desired item from the menu · touch off · the audio signal is turned off for this feature
Save and close
· touch OK · changes are saved · screen closes · Setup screen appears
Changing the motor speed
Setup menu
· press the external Setup button, menu appears · touch Motor Speed · menu appears
Change the maximum motor speed
· touch the arrows to alter the maximum sewing speed (880 stitches/minute is the basic setting) · a reduction or increase in the motor speed is reflected in this number · each touch of an arrow increases or decreases the number of stitches per minute by 10 · any change of the maximum speed affects all 4 speeds (1/4, 1/2, 3/4, 4/4) = slower or faster at all four levels
Save and close
· touch OK to confirm the change · touch esc to return to the Setup menu · touch esc to return to the last selected stitch menu
Back to basic settings
· follow the directions above to enter the motor speed menu · touch reset to revert to factory settings
62 Setup Program
Changing the basic thread tension setting
The basic tension setting of the artista machine applies to all stitches of the machine. The tension is factory set for best possible sewing results using a 100 weight, 3 ply polyester thread (100/3). Other types and weights can affect the stitch, causing a need for a tension adjustment to get the best results.
The overall tension setting of the machine can be tightened or loosened up to 20% in the Setup program. This setting will remain in effect until it is changed again, even if the machine is turned off.
Changing the tension setting in the Setup program will affect all stitches of the machine. Any secondary changes using the TTC button (see page 51) will be changed using the basic setting as a base.
Note: Basic setting refers to the over-all tension setting of the machine. This may be the factory setting or your own if you have adjusted the tension in the Setup program.
Setup menu
· press the external Setup button, menu appears · select Thread Tension · thread tension screen appears
Altering the tensions
· the perfect stitch formation is shown in the middle of the left side of the screen · the scale shows a possible change of +/- 20% · the basic value is indicated by a fine line at 0 · a changed setting is indicated by a black bar · touch the arrows up or down to alter the tension: touch the up arrow if the stitch formation looks like the top example = need tighter upper thread tension (the upper thread is loose which allows it to be pulled further through to the underside of the fabric) touch the down arrow if the stitch formation looks like the bottom example ↓ = need looser upper thread tension (the upper thread is tight which pulls the lower thread further through to the top of the fabric) · touch OK · the alterations are saved and the screen closes · the tension alteration affects all stitches and remains saved when the machine is turned off
Back to factory settings
· touch reset to return tensions to the factory settings
Save and close
· touch OK to confirm the change · touch esc to return to the Setup menu · touch esc to return to the last selected stitch menu
Setup Program 63
Start screen on and off
Setup menu · press the external Setup button · menu appears · touch Start Screen
Turn start screen off · start screen appears · the start screen can be turned on or off · touch off · the start screen will not appear next time the machine is turned on · the practical stitch menu appears immediately when the machine is turned on
Turn start screen on · touch on · the start screen will appear every time the machine is turned on, followed automatically by the practical stitch menu
Save and close · touch OK to confirm the change · touch esc to return to the Setup menu
· touch esc to return to the last selected stitch menu
Return to basic settings
Setup menu · press the external Setup button, menu appears · touch Return to Basic Settings
· a message will appear asking you to confirm that you want to return the machine to the basic settings · touch yes; the Setup screen reappears · a clock shows on the screen indicating that all changes in Setup are being reversed
· touch no; the Setup screen reappears · all existing changes to Setup remain in effect
· a message will appear switch off and on your machine · the factory settings are restored
64 Setup Program
Sewing light
Setup menu · press the external Setup button, menu appears · select Sewing Light
Switch light on/off · touch on · light will be on continuously when machine is turned on · touch off · light will not come on at all
Save and close · touch OK to confirm the change · touch esc to return to the Setup menu · touch esc to return to the last selected stitch menu
Service
The service function of the Setup program gives information about the version of software in the artista and lets you make calibration adjustments to the screen and hoop of the embroidery module (special accessory).
V ersion Information
The version screen shows information about the version of software loaded into the sewing machine and embroidery module (special accessory). This information is helpful if you are asking questions of the dealer or if you plan to upgrade the software.
Setup menu · press the external Setup button, menu appears · touch service
Service Screen · service screen appears · select version
Setup Program 65
Version information
· version screen appears · shows the version of software loaded into the artista sewing machine · shows the version of software loaded into the embroidery module (special accessory), if applicable · the embroidery module must be connected to the machine to show the version on the screen · the version of software in the sewing machine and in the embroidery module must be the same for optimum results · touch esc to return to the previous screen
Screen Calibration
Calibrating the screen is important for making on-screen selections by touch. If the screen is not calibrated, you may touch one selection and the machine will read one next to it. For precision touch selection, the screen must may be calibrated.
Note: The screen is calibrated at the factory, but shipping and transporting may affect it. The screen only needs to be calibrated if there is a problem with precision touching.
Setup menu
· press the external Setup button, menu appears · touch Service
Service Screen
· service screen appears · select screen · select this screen if the on-screen buttons do not react properly when selected (touched)
Calibration
· screen calibration screen appears · press each black point in the center, one after the other · it is not important which point is selected first · the machine will beep when the dots are touched to let you know contact was made · will automatically go back to the previous screen · touch esc to return to the setup screen · touch esc to return to last selected stitch screen
Important Note: When calibrating the screen, take care to touch the black dots only. If the screen is miscalibrated by touching any area other than the black dots, it may require a technical adjustment by an authorized technician.
66 Setup Program
Embroidery hoop adjustment
This adjustment calibrates the needle to the center of the embroidery hoop. The hoop adjustment can only be activated if the embroidery module is attached
Setup menu
· press the external Setup button · menu appears · touch service
Service Screen
· service screen appears · select Adjustment of hoop
Hoop adjustment
· hoop adjustment screen appears · connect the embroidery module to the machine · attach the large hoop to the embroidery module · insert the embroidery template into the hoop · touch check – the machine reads the hoop position; the needle should be positioned exactly over the center point of the template · if it is not, adjust with the arrows · it is only necessary to adjust the hoop once – the same setting changes will apply to all the hoops
Save and close
· Touch OK – close the screen · Touch esc – close Setup · Touch check in Layout 1 – close embroidery hoop adjustment
Screen contrast
The contrast of the screen can be adjusted for easier viewing.
Setup menu
· press the external Setup button, menu appears · touch contrast (lower right of screen) · contrast screen appears
Adjust contrast
· two adjustments are provided to adjust the contrast ($-$ = lighter, $+$ = darker) · touch to increase or reduce the contrast
· the original screen is visible on the left to control and check the adjustments as they are being made
Save and close
· touch OK · changes are saved · screen closes · Setup menu appears
Leave Setup program
Leave Setup program
· touch esc · Setup is closed · changes are saved · changes remain saved when the machine is turned off
eco Function
The green eco (ecology) function button on the front of the machine saves energy when the machine is not in use, but you don't want to turn it off and lose the settings. It can be compared to the sleep feature on a computer.
If the eco function is activated, the machine uses about 50% less energy. The screen in which you are currently working, all memory contents, and any other functions which you have selected remain active. The screen goes dark and details are just visible. Once you begin working again, the machine will be returned to its normal state.
Besides saving energy, the eco function is also a child safety device. Once the eco function is activated, the machine is "locked" and the foot control is inactive. The machine will only sew after turning off the eco function (pressing the button once), returning it to the last active screen.
68 eco Function / Special Accessories
Eco function · touch the external eco button · energy used will be reduced by 50% · useful when interrupting work for longer periods
Screen
· screen goes dark, details are just visible
· the machine will not sew in eco mode, it is "locked"
· all settings remain
· foot control will not operate the machine
Return to sewing
· touch the eco button
· machine returns to normal function
· the eco function is cleared when the machine is turned off
Special Accessories
The following pages offer information about additional accessories and attachments available for the artista sewing machine. These accessories will add to the capabilities and versatility of the machine, offering unlimited possibilities for expressing your creativity. Ask your Bernina dealer for more details!
CPS Program
CPS Program (Customized Pattern Selection)
Sewing computer This computer program allows you to replace a variety of stitches.
Embroidery module (optional accessory) This computer program allows you to replace the module's stitches and alphabets.
The CPS program allows you to personalize your sewing machine to suit your preferences and sewing requirements. And you can do it as often as you want.
Ask your BERNINA dealer for further details!
Special Accessories 69
Embroidery module
Embroidery module (special accessory) The embroidery module is a wonderful addition to your sewing machine, offering you unlimited possibilities to use your imagination and creativity to their full extent. It provides the possibility of sewing a wonderful array of large motifs in full color. The module attaches to the free arm and is connected to the right side of the machine in the connecting socket provided; it comes preprogrammed with 18 assorted motifs. When selected, they appear on the screen and can be sewn immediately. You can position, mirror image, enlarge and reduce the motifs.
Additional embroidery motifs, covering a wide range of subjects, are available on cards. Just insert a card into the embroidery module, select, and sew!
A detailed instruction manual is supplied with the embroidery module.
Connecting the embroidery module · turn the sewing machine off · remove the accessory box or sewing table · position the module on the back of the free arm · push the engaging lugs into the base plate of the machine (back right)
· insert the plug in the connection on the right side of the machine (embroidery module symbol) · turn sewing machine on
Designs · embroidery menu appears · touch the embroidery module symbol to access the preprogrammed designs · touch the teddy bear symbol to access designs from cards (extra accessories – see page 69–70) · the position, size, and density of the motifs can be altered
· designs can mirror imaged, as well as rotated · a detailed instruction manual is supplied with the embroidery module.
Embroidery cards
Preprogrammed embroidery design cards covering a wide range of subjects can be used in conjunction with the embroidery module.
Each card is devoted to one particular theme. New cards are introduced on a regular basis so that you can build up a diverse library of beautiful motifs, each relating to a specific subject or theme. The cards are inserted into the embroidery module. You can then view the motifs on the screen of your sewing machine.
Inserting the card · turn the sewing machine off · insert the card into the slot in the module
Embroidery card menu · the embroidery menu appears · touch the teddy bear symbol
70 Special Accessories
Embroidery motifs on the card · the first motif screen appears · each motif is numbered · scroll to view further motifs · select and sew the same as for stitches programmed on the embroidery module.
PC Embroidery Software (optional accessory)
BERNINA Embroidery Software which allows you to combine, mirror image, resize and embellish existing motifs.
You can also create and embroider your own designs up to 155 x 200 mm. The process is controlled by you from the first stitch on your screen to the finished motif on fabric. Each design is uniquely yours. You design – your machine does the work!
The finished creations are transferred directly via a connecting cable (9-pin serial port on the machine) to the embroidery module. The designs can be saved in blank memory cards or the embroidery module itself.
The Windows format of this PC program will be familiar to many of you and is easy to understand and use. A computer scanner, which can be purchased at computer stores, is a real design aid, allowing you to scan clip art and original designs for digitizing.
Ways to save your PC designs · on your PC · on a blank memory card inserted in the embroidery module · on a blank memory card inserted in the reader/writer box (optional accessory) · on the embroidery module itself
Connection cable · turn the machine off before attaching the cable · insert the cable into the appropriate socket on the right side of the machine (PC symbol) · turn the machine on
Detailed instruction manuals are supplied with the artista software programs.