6 discussions on InspirePoint about the Singer 14SH654: what owners asked, what went wrong, and what fixed it.
After replacing the the upper looper, the thread is not chaining andit sounds like two parts are rubbing together inside machineThe user manual does not have instructions for setup / calibration.We've tried a range of settings, but with no...
I've broken the upper looper in my singer serger ( can't tell you how, but Idid) went on ebay and purchased a replacement part. I though i would screw in but I can't. it's a differentscrew then any in the entire machine and I can't seem...
My wife would like a serger for her birthday. We have had good luckwith her modest Brother sewing machine which we purchased from Costco(i.e. lifetime over-the counter satisfaction guarantee on everythingthey sell). However, searching...
My wife sews, a lot, and recently bought a used Serger. This is her first time using it, and she's running into a STRANGE problem. With four spools threaded through the needles, she runs it for a while... and when she stops the thread is...
Greetings, allI'm about to buy my first serger, mostly because I've got a projectcoming up that's going to feature a lot of chiffon and velvet and,darnit, I need rolled hems and a diff feed. Besides, I've been sewingfor ten years and I'm...
Hello everyone...I'm going to buy my first serger and have a pretty tight budget so Inarrowed my choices down to a factory-refurbished Brother 1034D andSinger 14SH654. I've found both for about $200 including shipping. Alot of online...