Our sewing has been nominated for an award!

Hi folks,

I just thought I would drop you a quick note to let you know that Karen (my wife) and I have been nominated for the 'Kite of the Year' award for 2006 at the Kitebuilder.com forum!

I made a step-by-step build log of the entire process that ran to a total of 21 pages and has received more than 6,000 views to date and can be seen here....

formatting link
are up against 11 other kites for the title and voting ends on January 30 so it is going to be interesting to see how we fair. Voting (and viewing the other nominees)is restricted to forum members only I'm afraid so you would need to register with the forum in order to do that (it is free to register). If you do decide to register the nomination page can be viewed here....

formatting link
and it contains the reasoning behind each kite's nomination. The voting instructions and a round up of all the kites is on this page....
formatting link
hope you enjoy looking at this rather different form of sewn materials ;-) .

Reply to
Larry Green
Loading thread data ...

CONGRATULATIONS, CONGRATULATIONS!!!!

Reply to
itsjoannotjoann

Thank you, Thank you ;-)

Reply to
Larry Green

It's beautiful. Well done!

Sarah

Reply to
Sarah Dale

Congratulations! :) :) :)

I'm thinking seriusly... Maybe I should view the competition? ;)

Fingers are crossed for you!

Reply to
Kate XXXXXX

Thanks Sarah, glad you like it ;-) .

Reply to
Larry Green

Thanks Kate, did you ever get James started on building a kite? That site is built for kite builders of all capabilities from raw novices to experts and it is a great place to learn about kite building, materials, techniques and it even covers sewing techniques specific to kite building too. The regular posters make it one of the friendliest forums on the whole internet and everyone willingly shares their knowledge for the benefit of others. It is a great place to hang out and enjoy some truly wonderful creations.

Reply to
Larry Green

I ran out of time at the end of the summer term, but I have plans for this year, and I'd quite like to do some with his scout troop as well. :) Closer to the time I may well become a full member. I shall certainly need some guidance, but I cannot forsee anything that a little practice won't sort! After all, it can't be so different from making spray decks, outdoors clothing, historical corsets, fairy wings, and bridal veils, can it? ;) Hm... Maybe the wind factor will make a difference...

Reply to
Kate XXXXXX

Wow, that's pretty cool. How big is it?

-Irene

Reply to
IMS

Snip

In many ways it's easier than all of those as there aren't so many 'fancy' seams and finishings to worry about (although it is more like fabric engineering than haute couture). Handling the ripstop nylon might be more difficult for some as it is slippery and two layers will try to get away from you but even then I would still rather sew RSN to floppy satin/nylon dress material!

Don't eat baked beans before you start sewing and you should do just fine! ;-)

Reply to
Larry Green

It's 8 ft. (2.4 M) from point to point (diagonally or across the middle of the kite as it flys with the flat face to the top rather than a point) and covers an area of roughly 41.6 sq.ft. (3.9 sq.M). It contains more than 350 individual pieces of fabric, reinforcement, edge binding, grosgrain ribbon and twill tape.

That's not the biggest kite we have built to date either. These.....

formatting link
are 14.5 ft. (4.4 M) from wing tip to wing tip and stand 6 ft. (1.8 M) tall including the tail.

Reply to
Larry Green

ROTFLOL!!! You really should put up a warning....

Reply to
BEI Design

Having sewn a deal of each, I'm with you there! At least the RSN doesn't try to live UNDER the table rather than on it, like bias cut cheap poly satin!

Hehehehehe!

Reply to
Kate XXXXXX

What and spoil all the fun of imagining all you folks spraying various fluids all over your keyboard/monitor/cat! Not likely! ;-)

Reply to
Larry Green

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.