preserving bowl blanks

Yesterday I picked up on the street some Bodark logs and sawed up a bunch of

12 - 18" bowl blanks with a chain saw. I don't have any more anchor seal and probably won't be able to get more for a week or so.

Can I just paint them with oil based paint that I have lying around? What about putting them in a big plastic garbage bag and storing them until I get the wax?

I talked to the guy who had the tree sawed down and found out that the tree had been down a week. During that time it had already started to crack in the Dallas TX heat. I will not get to some of these blanks for several months. Has all of my time been wasted?

I sawed up the blanks in my driveway. A driveway covered with 2" of bright yellow saw dust is a real traffic stopper.

Thanks Paul Gilbert Dallas, TX

Reply to
Paul Gilbert
Loading thread data ...

This is not a response from one of the experts in the group but I just cut down an aging cherry tree in my woods in WI and covered the ends of the downed log and the 3 foot high stump with paint from a spray can until I can finish the job. I was not expecting major problems but then may be surprised.

Why not just paint the wood with an oil-based paint until you get the Anchorseal (sp?) When you get the Anchorseal paint over the other paint. This approach may help until you get the Anchorseal. Do others in the group ever get caught short and end up putting Anchorseal over a 'priming coat' or won't it stick to anything but wood?

Reply to
TWW

I'd use a heavy body house latex paint

Reply to
Ralph E Lindberg

Reply to
robo hippy

If it's only for a week, try keeping them in plastic bags or wrap, but check them every couple of days for mildew/fungus.. IMHO, this works well for a very short time but should not be considered an alternative for sealer.. BTW: my budget doesn't allow for Anchorseal, so I use this:

formatting link
Go there and search for Sealtite"

mac

Please remove splinters before emailing

Reply to
mac davis

our turners club buys anchorseal in 55 gal. drums and resells it to the members (bring you own gallon jug). that makes it cheaper than sealtite. Paul Gilbert

Reply to
Paul Gilbert

I tried a gallon of this and found it too thin and drippy. Went back to the one sold by woodcraft. Just my weird preference.

Reply to
Gerald Ross

Did ya shake it well, Gerald?

My first experience was like yours, then I realized that most of the "good stuff" was still in the bottom of the jug..

mac

Please remove splinters before emailing

Reply to
mac davis

well, logically, if you bought Sealtite in a drum, it would be even cheaper, right? The question is whether or not Anchorseal is a lot better than Sealtite, in which case, the cost shouldn't matter..

I used maybe a quart or 2 a year before I moved, and at the time I bought the sealtite, it was the only local product I could get.. Worked fine for me as I remember.... I haven't seen green wood for over 2 years now..

mac

Please remove splinters before emailing

Reply to
mac davis

Yep.

Reply to
Gerald Ross

Hey Gerald.. just re-read this and realized that you weren't comparing it to anchorseal.. I've never found sealer at Woodcraft, what name does it go by there?

mac

Please remove splinters before emailing

Reply to
mac davis

te:

Reply to
robo hippy

In my haste (which is unusual in me) I mis-spoke. I have used some from Woodcraft in the past, but my last few jugs came from Packard. They call it Green Wood Sealer.

Reply to
Gerald Ross

I've always just assumed that the house brands were relabeled Anchor Seal. Sort of like Libbey and Del Monte, etc. green beans all coming from the same factory...

...Kevin

Reply to
Kevin Miller

Reply to
l.vanderloo

AnchorSeal is made by U C Coatings in Buffalo, NY.

formatting link
I've toured their manufacturing plant and the only label I saw on their end sealer was "AnchorSeal".

Reply to
Nova

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.