E-mail them direct, there's a contact e-mail on the website.
formatting link
Cheers Paul
>I have a VL 200 and the tailstock is stuck. It will not advance or
>retreat. I removed the locking handle and there appears to be a piece
>of metal in there which does not match the color of the shaft which is
>"supposed" to move in and out, was it attached to the locking handle
>and now binding the movement? I also tried to remove the set screw
>opposite the locking handle and it will only rotate 2-3 degrees either
>way and then is bound tight. It appears to align with the keyway, any
>idea that the problem might exist here, if so suggestions please?
Unless otherwise stated all references to location refer to Western Australia