Woodturning Crafts

  1. Home
  2. Woodturning Crafts
7010 Threads Posts
to

Worth reading in Woodturning Crafts

myestrey

I finished turning the outside of a walnut burl bowl. I sprayed one coat of Krylon matte finish on the bowl and the fin...
5 comments posted 21yrs
posted by bbadland
5 comments posted 21yrs posted by bbadland

BUFFING: thanks to all that suggested the Beale

Well, the Beale buffing "system" came last night... My wife had ordered the buffing system from Penn State Ind. and was...
4 comments posted 21yrs
posted by mac.davis
4 comments posted 21yrs posted by mac.davis

Apricot, CostCo and LDD

So this guy now has an orange, Borg Orange, five gallon bucket of a bunch of roughed to round, fresh cut, apricot, subm...
6 comments posted 21yrs
posted by charlieb
6 comments posted 21yrs posted by charlieb

LDD and an Australian technique

If I can make this link work it might be of interest to see what some folks are doing. The lack of soap should be of in...
3 comments posted 21yrs
posted by tomnie
3 comments posted 21yrs posted by tomnie

Need Help

The rubber around the metal wheel on my 14 inch Jet Bandsaw has gone bad, and I need to replace it. Where would be a goo...
4 comments posted 21yrs
posted by Ghodges2
4 comments posted 21yrs posted by Ghodges2

Creative Forum on Arts, Crafts and Photography

Hi everyone, I would like to introduce to you guys, to a dynamic new forum focusing on Art, Crafts, Painting and Glow i...
0 comments posted 21yrs
posted by forum4asia
0 comments posted 21yrs posted by forum4asia

candle cup inserts alternatives

can anyone suggest and aletrnative route to finding a supplier for these - at 40p each they seem to expensive for all th...
4 comments posted 21yrs
posted by geoff_tulip
4 comments posted 21yrs posted by geoff_tulip

WTB - Norfolk Island Pine

Greetings!! I was wondering if anybody knew where I could get some NIP in the northern suburbs of the Detroit metropoli...
1 comments posted 21yrs
posted by rmcconachie
1 comments posted 21yrs posted by rmcconachie

basement shop question

Hi all, I am new here and want to say hi to everyone and post a question. Those of you in basement shops, how do you ha...
24 comments posted 21yrs
posted by epistola
24 comments posted 21yrs posted by epistola

First Green Wood Turning

The 75+ year old apricot tree, a remnant of one of the many orchards that covered Silly Cone Valley, up against the roo...
6 comments posted 21yrs
posted by charlieb
6 comments posted 21yrs posted by charlieb

Totally Turning

I may have missed it... but I didn't notice anyone mention the Totally Turning Symposium in Albany, NY in October. http...
7 comments posted 21yrs
posted by grossboj.nospam
7 comments posted 21yrs posted by grossboj.nospam

Weed Pots

As a newbie, I've started with spindle turning. You can use all sorts of scrap to learn on - and don't need a dempsty d...
2 comments posted 21yrs
posted by charlieb
2 comments posted 21yrs posted by charlieb

Turbo RCD vacuum chuck?

Leafing through some old turning magaines, I came across a novel vacuum chuck in the September 1997 issue of "Woodturni...
8 comments posted 21yrs
posted by John
8 comments posted 21yrs posted by John

questions about Nova chucks

I have been turning for years but I have always done it with face plates or spindle turning. I find myself wishing I ha...
13 comments posted 21yrs
posted by darrenge
13 comments posted 21yrs posted by darrenge

Re newbei buying a lathe

Some good advice so far, but why not go and do a course with a local pro turner who I am sure will get you off to a goo...
1 comments posted 21yrs
posted by gambier.d.reeks
1 comments posted 21yrs posted by gambier.d.reeks