A walnut stand that turns a kids' keyboard into real furniture

Nov 16, 2026 Last reply: 3 hours ago 3 Replies
Jump to replies (3)

The scariest moment in this build came after the side brackets were already shaped. The grain had been oriented in a way that would fight the natural movement of the wood and could eventually crack the piece. Rather than patch it, the maker scrapped those brackets and remade them with the grain running parallel, which is exactly the call I would want to see on furniture meant to live with a family for years.



The rest of the construction is a nice mix of fresh lumber and rescued stock. Walnut lumber sits alongside wood from a salvaged tabletop plus offcuts from earlier projects, and MDF sheets served as the basis for template routing the curves. The shelf and back panel were cut to 40 inches wide, giving a half inch of clearance on either side of the 39-inch keyboard. That kind of tidy fit shows real care around a mass-produced plastic instrument.



What stands out to me is the shaping work. Curved template routing takes more effort than simple angular cuts, and the maker explains why the curves earn their keep here. Roundovers were routed on the shelf and back panel, and the build moves through shaping the sides, assembling the top, then the legs and stretcher before final assembly. The design itself came out of sketching and polling, and the stated aim is to put the keyboard on display rather than hide it away.



The one trade-off I keep turning over is that display-first idea. Showing off the instrument solves the clutter problem in a handsome way, though I do wonder how it reads once the family's daily mess piles up around it.



Project by Foureyes Furniture. Watch it on their YouTube channel:

formatting link


Remaking those brackets instead of living with the grain mistake is the smartest choice in the whole build. It costs time and good walnut, but parallel grain around a bracket that sees stress is the difference between a piece that lasts and one that splits. Too many builders would talk themselves into keeping the first pair.

I am curious about the joinery on the legs and stretcher. A Domino joiner is in the tool lineup, so were the stretchers connected to the legs with Dominos, or was there glue and clamping pressure doing most of the work there? Also, were the MDF templates traced from the sketches directly, or redrawn at full scale first?

Since the salvaged tabletop wood and offcuts were already part of the material pile, I would love to see a matching little bench or stool made from what is left over. It would sit at the same height as the keyboard, give the kids a proper place to play, and use up stock that still has plenty of character in it.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required