The toughest challenge here was the condition of the blank itself. Moonpie Creations started with a dried, heart-shaped maple tree cookie pulled from workshop storage, and the central cavity held rotten wood and inner bark that had to go. Chisels and a mallet cleared that out, and both faces were flattened on a CNC router bed before the whole piece got a coat of epoxy thinned 50:50 with denatured alcohol to firm up the soft spots. Working on a piece that soft and hollowed-out takes patience, and the order of operations looks well thought through to me.
The void filling is the part that stands out. Foil tape on the back formed a dam, and epoxy tinted with micro-pearl mica powder went in layer by layer, which the maker says prevents thermal cracking in a deep pour. Once cured, the slab was flattened again, run through a drum sander, and leftover pinholes were filled with CA glue before more sanding. For the flood coat, blue painter's tape bordered the perimeter and was peeled off while the surface was still warm, with a heat gun popping the air bubbles. A smartphone flashlight held at a low angle helped hunt down scratches, a trick worth stealing.
The reverse side carries a laser-engraved inscription with the family name and an establishment date of Nov 12th, 2026, sanded through 80, 120, and 220 grits. One thing left open: the piece stays uncoated until wedding guests sign the surface, and the final polyurethane topcoat is not shown. I would love to see how that last step turns out.
Project by Moonpie Creations. Watch it on their YouTube channel: