lampworked drawer pulls and knobs

drawer pulls and knobs?

Try Lee Valley Hardware (probably at

or one of the catalogs that offer supplies for wood turners. Check on rec.crafts.woodturning for a list.

The price you give sounds way high to me. You can get hanger bolts, with one threaded end for the knob and another, differently-threaded end for the drawer quite economically, like well less than a dollar each, and they come in multiple lengths.

Mary

into drawer pulls and knobs?

If you live in or near a big city, try finding a McMaster-Carr warehouse. They are like a combination of WWGrainger and HomeDepot. They have almost any little fastener and the like....

Also you may find what you want in HomeDepot's hardware aisle. Look in the section where the specialty fasteners are...usually a bunch of drawers with all sorts of "stuff"

Forget about Home Depot, which will have only the most common stuff, in little bags, only a few of each, at a relatively high cost. What you want is probably what I bought from MSC (

) stainless steel

8-32 threaded spacers or stand offs, which you can see discussed at (a bit slow to load) Theseare slightly larger (1/4th inch) than the ones in the kit (3/16") but lookokay [ several lengths, 67721647 as below, go to the page for othersizes.1/4 In. O.D. Round Threaded Standoffs Type: Round Threaded StandoffsBody Length: 3/4 Thread Size: 8-32 Material: Stainless Steel Finish/Coating:Bright $1.50

Thanks everyone for the help.