17 discussions on InspirePoint about the Vicmarc VL100: what owners asked, what went wrong, and what fixed it.
I have been turning for several years on a Oneway 1224 and I am = considering moving up to a larger lathe. The two that I am considering = the most is a Oneway 2436 with the 44" outboard setup or the VB-36 with = tail stock setup. What do...
Have been woodworking for years, most seriously for the last 2. Am about to jump into turning ... and have discovered that my (30 year old) kids and some friend are also interested ( and will be using my gear ... which I am happy to...
As I get ready to buy the new lathe, I'm trying to iron out potential problems.. One is that I have 2 Oneway Talon lathes with 1" x 8tpi adapters and the new lathe will be 1 1/4" x 8 tpi.. I could order one 1 1/4" adapter from Oneway and...
I'm getting a real complex! First the Delta slow grinder (3replacements; the last is working great), then replace the Reeves drivein the General, then replace the belts in the General, then re-replacethe whole reeves pulley, shaft and...
Speaking of turning on an apple corer: I have two friends that turn incredible stuff on lathes I wouldn't own. Myfriend Eric is on his second homemade lathe. For years he used a 3/4 hp openframe motor with no start capacitor (he would spin...
I just upgraded from a midi to a new Powermatic lathe and would like to hear anyones recommendations for a chuck. I have heard a lot of good things about the Oneway Stronghold and SuperNova 2 chucks. Is there any benefit of one over...