I bought the standard model with the step pulley system and wonder if it is possible to convert it to V/S. Thanks. I have modified it like the General that Dell Stubs has in his Video by using a pulley system and a foot pedal and it works great. Certainly adds to the safety and you can check your work while either turning or finishing very quickly and be back in business right away without turning the lathe off and on. All lathes should be manufactured like this for the convenience and safety.
Can I convert my Jet Mini to a Varriable Speed ?
Dec 23, 2004
3 Replies
With the arrangement you now have, why would you want to convert to VS?
Barry
Bob, I wonder if a ribbed belt wears more than a V belt as Stubbs used? A simple clutch method for the Jet mini is to use the built in belt adjust lever with a dowel to prevent the loosened belt moving backward and tightening at the front.
Contrary to other's experience, I find that its large range makes the VS on my Jet mini a worthwhile convenience, although not necessary.
Turn to Safety, Arch Fortiter
formatting link
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required