I have read with interest the posts re chainsaw sharpening with a dremel or equivalent. I have not been able to find the tool to replace a 3/8 in. file. The local DIY store has some that look like 1/4".
Mike
I have read with interest the posts re chainsaw sharpening with a dremel or equivalent. I have not been able to find the tool to replace a 3/8 in. file. The local DIY store has some that look like 1/4".
Mike
I have one called the "EZE-LAP Diamond Chain Saw Sharpener". It didn't cost much, maybe $7 US complete with guide that works in either Dremel or an ordinary drill. I got mine at a store in the US that doesn't do mail order but the packaging lists a website:
For what it's worth, It took a while to learn to do it well with the files and that is what I use. It is a little slower (not a lot) than the machine. The files always seem to run well better I am out in the hedge row.
My local chainsaw/power equipment shop stocks Dremel-compatible stones to match up to all of the popular chain types (at least those that require a round file not a flat). They come in packs of three IIRC.
I've found all 2 of the 3 sizes at WalMart, and all 3 at a Surplus store that carries Dremel stuff.
Thanks for the replies, I should have put 3/16", another senior moment. I also should have said I am in the UK.
Since I made the mistake, perhaps I could ask does the size of your chainsaw engine or length of the bar determine the blade size and therefore the file size? or is it just a manufacturor thing.
Regards
Mike
Noticed the UK, and though how you guys over there must be REAL men to handle a chain that big and aggressive.
The chain determines the size of the file. When you get one, you should see the recommended size on the package, or the individual who made it up should have the proper size written on his reel of chain. Other than that, the bar determines the thickness and the number of links required. hat should be written on the bar itself.
InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.