Ping: Darrell Feltmate

====================

Mac, That sounds similar to the set up I use for my "pyramid" tools (3 point sounds like something that actually has multiple points instead of 3 sides). I cut 2 mesquite triangles (1 1/2" per sideby 1" thick) and drilled a 3/8" hole thru one and a 1/2" hole thru the other to match my 2 tools. each has a set screw to lock the tool into position. A line is scribed onto each triangle and along the shaft of each tool. SAtick the tool into the triangle, snug down the screw, then use it like the turner you saw. Another thing I usually do is sharpen one face longer than the other 2. That gives a little more flexibility in using it than with all 3 the same. FWIW

Ken Moon Webberville, TX.

Mac and Ken Thanks, nice ideas. I usually just eyeball the tool and sharpen but these are good ideas for beginning users. for that matter, jig sharpening is generally better, in my experience. I am not interested in an argument over this and am willing to concede that a better freehand sharpener would get better results.

I was thinking how sharpening challenged I was when I made those 3 marks and started grinding the faces, Darrell... this sounds like a much easier way to make the tool..

I'm using sort of a "skewchisle" tip or whatever they call it, on my Oland now.. works GREAT!

Mac