1. Home
  2. Beading Crafts
  3. Crimping techniques

Crimping techniques

I am not very happy with my crimping because of the squashed effect that is sometimes a bit sharp. I heard someone once say that she glued her crimps on to avoid this problem - and that it was successful because the crimps are rougher inside than beads, and therefore hold the glue better.

I don't possess crimping pliers, but perhaps this might solve the problem. Could someone with experience of both techniques please advise me. I would be most grateful.

Cheers

Daisy

Carthage demands an explanation for this insolence!

Reply to
Daisy
Loading thread data ...

Good crimping pliers are very handy but the most important thing is good crimps too. Use the right size and shape. I struggled to get my crimps just right before I found out that I was mashing them too hard. Someone said that the amount of pressure used to shake hands is enough, you're putting a crease in the crimp tube, not flattening it. Then use the other part of the pliers to round it over. If you're worried about sharp edges, you're squeezing too hard.

I also use crimp covers to finish off as it makes the gap disappear and covers the crimp nicely so that it looks like beads all the way.

-Su

formatting link
formatting link

Reply to
Su

Daisy -

Two options: squash the crimps flat, then cover with a crimp cover use a crimping pliers (crimp cover optional, but a nice touch)

I also find that the crimping pliers is more secure. Just don't over do it during the rounding stage.

------- Barbara

formatting link
Blog at
formatting link
eBay & Justbeads:penguintrax problem. Could someone with experience of both techniques please

Reply to
Barbara Forbes-Lyons

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.