lamp hardware

You'll need to find a place that fixes lamps. You won't find what you want at Home Depot or at most of the Stained Glass places. Try your yellowpages for lighting fixtures- repairing and parts. What is hard to find is the 3 position switch that selects between the top, the inside lamp, or both. This is NOT the same as a 3-way switch for 50-100-150 bulbs. The rest of the Inner Glow lamp hardware is pretty common. You'll have to get some special fixture wire (really small) to feed back down inside the lamp to power the inner bulb. I've found that a low wattage long skinny bulb works best. If you were in Atlanta, I could tell you exactly where to go to find this stuff.

Try Ace Hardware. I got all the stuff there a few years ago. You need the candleabra socket and the right 3-way socket (As Moon mentioned) plus the fittings...threaded pipe, etc. Take the book with you. As I remember, the book at a drawing of the electrical setup.

Andy

or you can try:

good luck, Dennis

If you have a Hobby Lobby in your area check it out, I get in there for an hour at a time, that is the only place I can find bambo rings for my glass birds I make