Eight months ago I shared the ribcage necklace here, and I finally got the matching hand pieces done. Fair warning, these took way longer than they should have, and not for the reason you'd think. The beadwork itself was maybe 20 percent of the work. The other 80 was me staring at the pieces trying to work out how to assemble them so they'd actualy sit on a hand and be wearable. So fiddly, but I got there. Specs for anyone curious: 11/0 delicas stitched on white felt, with the edging done as a 3-thread whip stitch. The backing is auto chamois. Everything is joined with beads and jump rings, the bracelets are loomwork, and the rings are clear rounds strung on clear stretch cord. These hands belong to a bigger personal project I've been chipping away at. I rhinestoned the mask myself and built the crown too. It felt good to finally call this part finished.
Finished the beaded skeletal hand pieces
Nov 21, 2026
Last reply: 22 hours ago
6 Replies
I have been on the other side of this exact problem. I did a beaded skull face last year, stitched onto stiff felt, and the beadwork itself was honestly the relaxing part. Working out how the piece would actually sit on a body and move with me took way more out of me than the stitching did, and I still was not fully happy with it when I called it done. So reading that the beading was a small share of the work for you while the assembly ate up the rest made me feel weirdly vindicated.
In your photo, the gold outlines along the finger bones look so crisp, and the point where the bracelet meets the wrist on the left hand is seamless. I kept zooming in on that joint. Question for you, since you have clearly cracked this: when you were fitting the pieces so they would sit on an actual hand and stay wearable, did you work over a hand mold, or just fit as you went on a live model? I kept trying to eyeball the curve and mine never sat right. The rhinestoned mask and the crown sound like they deserve their own reveal when you are ready. I would love to see the whole ensemble together.
Funny thing, I am the opposite on this. The part you clearly slogged through, all that head scratching over how a beaded hand would actually wrap a real hand and stay put, is the half of the process I enjoy most. My own project is a beaded beetle brooch, and the evenings I spent holding the thing up against my collarbone, turning it over, working out where it needed to flex, that was the good part. The stitching felt like the chore to me. So reading that the beadwork ended up being such a small slice of your effort while the wearability puzzle ate the rest genuinely made me smile.
In your photo, the gold-outlined bones on the fingers caught my eye, especially the way the ring loops sit over the knuckle joints. There is a looseness there that reads as a hand rather than a flat pattern, which is hard to pull off in stiff felt. The teal satin behind it all makes the white really pop too. One question, since I have never trusted clear stretch cord on anything I actually wear: do the rings on the fingers feel secure when your hands are moving around? I would worry the loops shift as soon as I flexed, but maybe the fit on a finger is more forgiving than on a wrist.
Funny how some habits never age out. Stitching an edge by hand with thread, the way we all learned before fancy findings took over, still holds up better than half the shortcuts I see now, and that gold-outlined edging on your finger bones in the photo is proof. The beadwork is lovely, but the thing that caught my old eye was the joint where the bracelet meets the wrist on the left hand. My question is about those joins: do the jump rings take the flex of a moving hand without working loose over time? I always figured a skeletal piece would rattle itself apart at the connections.
I have to push back a bit on the beetle brooch comment above. Holding a brooch up against your collarbone and turning it over is not really the same problem as this. A brooch sits flat against still fabric, but a hand bends at every knuckle and the whole piece has to move with it. I doubt you would find that fitting process fun if your beetle had to flex in five places at once. I looked at that left wrist joint in your photo and I still cannot work out how you got the bracelet to sit right where the hand pivots. Did the stretch cord rings give you any trouble when the fingers curl?
I keep zooming in on those little loops over the finger bones and wondering how they behave in wear. A ring that sits over a knuckle has to deal with the finger bending right at that spot, so I would love to know if the loops shift around much when the hand closes, or if the beadwork holds them in place. Also curious about the wrist join on the left hand, that transition everyone keeps praising. Does the loom band flex enough on its own when the hand bends, or did you have to build any give into how it connects to the bones?
Update: catching up on the replies. The comment about the beaded skull face summed my eight months up exactly, the stitching was the calm part and everything after it was the fight. And I think the pushback about the beetle brooch is fair, a brooch sits still while a hand bends at every knuckle. Holding it all up to a wrist at odd angles is where the evenings went. The set in my photo finally reads as one piece though.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required