Angled pocket card sleeve in buck brown leather

Nov 17, 2026 Last reply: 1 hour ago 3 Replies
Jump to replies (3)

The trickiest stage of this build is getting the angled pockets cut cleanly, and Makers Leather Supply handles it by running a craft knife straight against the blue acrylic guide rather than cutting freehand. The pocket pieces come from buck brown harness leather in the 3 to 4 ounce range, and that guided cut is what keeps the angle consistent on both of them.



Structurally the sleeve is a four piece laminate: two harness leather pockets layered over two panels of dark brown bridle leather that form the central body. The body is cut as a rectangle, with the knife working around the rounded corners. The sleeve is one of three wallets in a minimalist trio, tied to a February 2026 project box, and anyone who missed that box can pick up the three wallet acrylic template set instead.



The edge work is the standout detail for me. A Barry King size 00 grooved edger bevels the exposed top and side borders of the finished wallet. A burnishing solution mixed from Elmer's glue and water sits in an amber bottle, gets dabbed on with a wool dauber, and then the edges are polished with a canvas cloth. A size 0 edge creaser is run along the polished margins to indent a decorative border line, and the second pocket piece receives the identical treatment before any gluing happens.



One thing is still up in the air: whether the tops of the center sections should be edged and burnished before gluing has not been answered yet. The maker finishes by presenting the creased pocket panel, and it looks crisp.



Project by Makers Leather Supply. Watch it on their YouTube channel:

formatting link


I think the guided cutting is the smartest call in the whole build. Holding a craft knife against an acrylic template takes the wobble out of long angled cuts, and on thin pocket pieces one slipped stroke would ruin the panel. The trade-off is that the template locks you into one pocket angle, so there is little room to improvise the shape.

How does the maker handle those rounded corners on the bridle body piece? Cutting around a curve with a craft knife against a flat template edge seems tricky to me. Does the knife ride the acrylic the whole way around, or are the corners trimmed freehand once the straight edges are done?

My suggestion would be to give the tops of the center sections the same treatment the pockets get, beveling, burnishing and creasing them before the glue goes on. That way no raw bridle leather edge is left hidden inside the seam, and the decorative border line would carry around the whole wallet consistently.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required