Pants leg idea from Dewitt - oops - sorry

I have been miss-attributing this idea to coming from one of the Steve's. In doing an archive search I found this. Sorry about that. It was a Steve (not a regular I think) who generated the thread that led to the response.

A really great idea - that is easy to use in different ways (I use a plastic burlap bag and don't pour slip in but store my broken dry clay in until I have enough to put bag with clay in bucket with hot water and a touch of vinegar - let it soak until thoroughly wet and then pull out the bag and hang to dry to the right consistency.

From Google Groups - the easiest way for me to search the archives ->

Apr 28 2000, 2:00 am show options

Newsgroups: rec.crafts.pottery From: Dewitt - Find messages by this author Date: 2000/04/28 Subject: Re: Reclaiming Clay Reply to Author | Forward | Print | Individual Message | Show original | Report Abuse

Cut one leg off a pair of old pants. Tie off the bottom, pour the slip into the leg, tie off the top, and hang up outside.

deg

Reply to
DKat
Loading thread data ...

Dkat,

The trouser leg trick is one of those universal techniques that come up quite regularly. I think you're right that Deg was the original poster on this NG, but I know that I've posted about it as have several others. I've also seen it on Clayart. I learnt the technique off Paul Stubbs who pots in Somerset, UK, and uses it primarily for his clay production, as well as his reclaim. I like your burlap sack in a bucket variation; it makes more sense than my current technique of stirring it up in a bucket, and then trying to pour it into the *leg* without spilling it!

Steve Bath UK

In article , DKat writes

Reply to
Steve Mills

I'm so glad to hear that you posted it as well. I really did clearly remember it coming from you and when I did an archive search coming up with a Steve I did not recognize and Dewitt being the actual source, I thought #$*@! - another senior moment.

Reply to
DKat

Shoot, I'd even forgotten I posted that. . . As Steve noted, it wasn't an idea that I originated. I will, however, add one thought that I don't recall reading anywhere else. When drying slip this way, the clay on the outside will tend to dry while the inside remains wet, wet, wet. If you manipulate the bag with your hands or drop it a few inches on to a flat surface several times every day or two, you can get more even drying.

deg

Reply to
Dewitt

In article , Dewitt writes

That sounds worth trying. I normally leave it until the outside feels pretty hard, then *undress* them cut them into lengths and layer them up, wrap them and leave for another week before wedging.

Steve

Reply to
Steve Mills

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.