binding question - what is "facing" a binding??

Question

hi, while surfing i came across this site with quilting tips. but this tip I don't quite understand. Can someone explain what this is about?

"Stuck trying to figure out what color to use for a binding? Don't want to detract from the quilt but don't have enough of the border fabric so that the binding won't show? Remember you don't have to add a binging, you can use a facing instead! Just cut your strips 2" wide, do not fold in half, sew on to the front as you would a binding, BUT clip the strip at the corner and PIVOT with needle down to continue sewing the next side. Then turn the whole thing to the back, mitering the corners, folding under about

1/4" and hand sewing the facing to the back. If you like, you can use monofilament thread (clear or dark, whatever suits your border color) and top stitch very close to the edge to keep the facing turned to the back! Voila! Your quilt is "un-binded"! Or as my kids used to say "VIOLA"."

quoted from:

formatting link

tia, Emilia

Louise · Accepted Answer

It sounds to me very much like sewing a facing into a garment, where the seam line is the edge of your quilt - no part of the binding will show on the front.

Roberta Zollner · Answer

It's like a garment facing, and you end up with a 2" (minus seam allowances) strip around the edge on the back side. A regular doublefold binding is less trouble IMO and certainly more durable. And who says it has to match the border? Roberta in D

"mini Mini" schrieb im Newsbeitrag news:Xns984A8E16A9BC3mininospamateasycom@212.40.5.54...

Patti · Answer

I have done a facing quite often - it does work beautifully.  It is just like garment facing.  I did not do it quite the way it is described here, but not significantly differently.The time, though, when facing comes into its own is when your quilt is not square or rectangular.  I did a small quilt with a very 'strange' edge shape for my brother.  You then trace the uneven edge onto fabric (or paper if you want to make a pattern first).  I used the pattern edge as my master and traced onto the fabric.  I then cut this out about 2.5" away from the drawn edge (inwards) and a bit more than a quarter inch (outwards).  I used more than a quarter inch for the seam allowance so that it would turn to the back more easily.  (I do it this way for square and rectangular, but you don't have to for them)..In message , mini Mini  writes

mini Mini · Answer

"Louise"  wrote innews:oS8Sg.70628$aJ.2616@attbi_s21: Oh, so the front is the edge of the top, the side is the stitching and the back is sort of a strip? Is that right?

mini Mini · Answer

"Roberta Zollner"  wrote innews:efb7nm$r80$     I think I get it.... I can't match the border cuz it'll be all the 2" scrappy pieces. I think I'll just do dark blue. It'll fade into the back ground.

mini Mini · Answer

Patti  wrote innews:     Thanks so much for the explaination.  I think I understand now.... ;o)

Patti · Answer

Yes, that's it, put neatly!.In message , mini Mini  writes

Donna in Idaho · Answer

I agree.  I only once faced a binding (on a very small wall hanging).  I'drather put regular binding on any day.

binding question - what is "facing" a binding??

Join the Discussion

Didn't find your answer?