Cherry Wood Thread Cabinet
Oct 09, 2007
67 Replies
Here are two more pics showing the cabinet with the door hardware and pulls installed and the door open.
formatting link
John
Gorgeous, John. I'm glad you got this far with it before I have to leave
-- I was actually hoping it would be completely finished so I could see it. Or that you'd decide you didn't really want it and would send it to me. ;)
Here is a view of the case with the first of many coats of varnish applied. Sanding in between coats and final waxing still to do and installation of the doors and back. This project is finally winding down.
formatting link
John
Here is a view of the lower case with three coats of varnish on it. I will see in the morning if that is sufficient. If so, then it is polish and wax and carry it upstairs and load it up. If not, then another coat should do it.
formatting link
John
For those of you who have been following this thread, I started another posting on the forum but you may have missed it. Here is a picture of the finished case. The last three pictures are of the cabinet in place and filled with thread, and tapestry yarn in the top case, and cones, embroidery thread, and serger thread and excess tapestry yarn in the bottom. This job is now complete. I am very happy with it and I hope you all like it. It is time to get back to quilting.
formatting link
Thanks for following along on this project,
John
She's a beauty!
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required