I am looking for a basic sewing machine. I have narrowed my choices down to models from Elna, Babylock, and Husqvarna/Viking. I know very little about the quality, reliability and service of any of the manufacturers. Any information or opinions would be a great help to me.
TIA
carolyn
Read the information on this website......twice! You'll get more opinions than you can imagine but it all boils down to which is best for YOU! It's about the same as the Ford vs. Chevy debate in the "boys' club". Penny has gone to a lot of work to put together one of the best sites I've seen on choosing your machine.
In article , carolyn of
Husqvarna are good (also make excellent quality firearms). I love my little elna Grasshopper (also made in an arms factory, and resembles an ammo box).Can't really comment on Babylock - but they've been going a while. Is there anything on
Val - Thanks for pointing me to that website. It will be very helpful. I was begining to think that buying a sewing machine is a bit like buying a car. They all get you from point A to point B, but have different bells and whistles!
AJH - I know Husky as a great chainsaw! and Viking as the appliances my dream kitchen will have. (I can dream can't I?) but not as a sewing machine or firearms. I guess it's a bit like Yamaha making musical insturments and motorcycles or GE making everything. I'll check your site as well.
Thanks for your opinions and help.
carolyn
Elna have an excellent rep here in Europe. I'm looking for an Elna Lotus myself! ;)
I have a HV Lily 550, now six years old, and I hate to count what I've sewn on it! I work as a dress and costume maker, and there is very little it won't cope with. I get it serviced at least once a year and have had very few problems with it (and those it has thrown up were very unusual! The handle broke, and was replaced under guarantee, and I thought I had a step motor problem, but it turned out to be a bit of lint caught in a peculiar place that could only be reached by taking half if it to bits!). I find it very reliable, very easy to use, and will sew through most things (including the metal head of a safety pin!)
I don't know much about Babylock, but I didn't like the serger/overlocker of theirs I tried.
Be careful what ignorant, unsubstantiated statements you make about certain brand names.
Husqvarna Viking machines have been made in Sweden for many years. The Viking appliances you dream of are made by a non affiliated company in Mississippi, they have nothing to do with Husqvarna, all though Husqvarna does make kitchen appliances and was one of the first companies to make a SAFE and efficient electric stove as well as dishwashers in 1934 for home use. Husqvarna started out in the late 1600s as a musket manufacturer, they progressed into the 1800s with sewing machines, they went onto bicycles, motorcycles, chainsaws, lawn and garden equipment. Their emphasis is on exceptionally high QUALITY ENGINEERING. Perhaps this is why the knowledgeable of quality respect the name.
Lets check out the Yamaha Pianos: Jazz Fusion Pioneer Will Boulware's CDs Feature Yamaha Pianist and composer Will Boulware has collaborated with such greats as B.B. King, Rodney Jones and Maceo Parker. His two latest CDs feature another great: the Yamaha C7 conservatory grand piano on which he insists.
Opera San José Names Yamaha Its Official Piano One of the premier regional opera companies in the United States, Opera San José calls on Yamaha Disklavier, grand and upright pianos for its range of rehearsals, recitals, training, coaching and special events.
Feisty New Jersey Opera Theater Names Yamaha "Official Piano" Up and coming opera company finds Yamaha pianos a quality match.
Joe Sample Takes a Solo Tour of Jazz's Past Jazz piano legend and Yamaha artist Joe Sample relies on Yamaha pianos to stay at the top of his game artistically - and to explore the roots of the music he loves in his latest CD release, Soul Shadows.
Usdan Center Purchases Yamaha Pianos Center chooses Yamaha pianos because of their consistency and reliability.
Yamaha Official Piano of Opera Company of Philadelphia The Opera Company of Philadelphia has once again confirmed Yamaha as its official piano. Officials at the 29-year-old institution say the quality and consistency of Yamaha stands up to the workload of rehearsals and performances that makes the opera run.
Their are dozens more famous, talented and reputable musicians who will play on nothing else. I know the Seattle Symphony uses several as well as the Seattle Conservatory of Music.
As a matter of fact Pavarotti insisted on a Yamaha piano in his accompanying orchestras.
I got my first Husqvarna sewing machine in 1974 and it still runs like a charm, I've dropped a total of $35 dollars in that machine since I've had it. I got the Designer1 the second year it came out and it's been a joy to use with no problems, also the HuskyLock (Husqvarna serger), love it.
These are whole separate factory who puts out these things so don't make snap decisions because unlike products have the same brand name. You will be limiting your choices with some unfortunate narrowed and unsubstantiated visions. There are quite a few very high quality brand machines and Viking is right up there on top.
And BTW......not one of those Yamaha pianos leak oil which is more than you can say for the motorcycle of the same name.
OK, all done venting now, *pant, pant, pant* Val
begin 666 blank.gif M1TE&.#EA"@`*`( ``/___P```"'Y! $`````+ `````*``H```((A(^IR^T/ $8RL`.P`` ` end
One hears a lot of snide remarks about discount store machines that I would take with a big grain of salt.
My wife has a Singer Touch and Sew which has had major gear failures 3 times over it's life. Each time it was $150 or so to get it fixed. The most recent was just after I got interested in sewing and I said "no more".
We browsed the net, went into the city to look at hardware, were insulted at both of the sewing shops about "discount" machines. We ended up buying a Brother at a discount store for about half the price of the so called premium versions and love it. I doubt if the gears will break any sooner that on the Singer but if they do, I can get a new machine for the price of repair on the Singer which is now a table for a machine that runs circles around it.
There seems to be a price break at the one-step button hole feature and I am very glad we opted for it.
Other than that, they all seem to work and are very similar. My only criticism of the one we have is the lack of finesse in the foot control. It is not as smooth at starting and low speed as I would like.
As a point of interest, I called one of the sewing stores to order some different presser feet and he insulted me again about the toy machine I have that won't last a year. Needless to say, I bought the feet elsewhere even though he had them in stock.
js
-- PHOTO OF THE WEEK:
My family's personal experience is that the newer low-end White machines do not hold their tension settings, and after about the third time in as many months to have it fixed, the dealer told us that the machine was not meant to be used as much as my son was using it, that it was only meant for occasional lightweight tasks but nothing regular.
Obviously some people will be happy with them. In my case the discount store machine put me off sewing for over 10 years as I thought the problem was *me* when in fact it was the machine.
Three years ago purchased a used top of the line Singer 401 for $100 (this machine was the best available in the 1950s) and it was by far the best SM purchase I made. All metal, gear driven (no belts), a boatload of built in decorative stitches, and will sew through anything you can fit under the foot. The old machines are so much better than the new ones available for the same $$ (or less). Now I have over 50 vintage machines; I took a SM repair class and can now repair them as well. And, I sew and quilt up a storm.
-Irene
-------------- You only live once, but if you do it right, once is enough.=20
--Mae West=20
--------------
Oh, boy, I never thought of that as why all these people tell me that they cannot sew, but I bet you're right. If that piece-of-junk White machine had been my first sewing machine, I would have given up, too.
Those things are known in some places as Touch & swear!
I'd hate that. Really slow speeds are a must for precision work of some types. I seem to do a lot of it!
What does your discount store stock in the way of instant lessons when something snarls up, repairs within a week, and guaranteed buy-back or trade in when you want to upgrade? Mind you, I'd never shop where they were rude to me, but my local fella has always matched prices with the warehouse places round here, and the service and after-sales help is second to none. I think I've been going to Wilf for service, repairs and machines for 20 years...
Looks like he's saved an Elna Lotus in the back room for me, too! :)
In article , Kate Dicey of Customer of PlusNet plc
Or "Touch and Jam"
InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.