Re: Small part for Singer? machine

At the Spring Fayre I helped at today I bought a packet of odd sewing bits - Stitch Ripper, needle threaders, stencil for hexagonals etc. Included was a Singer lightbulb (dead) and a small 1.3/4" bar which looks like a thread holder from a sewing machine. One end is drilled out and threaded to be screwed on to something. There is also a plastic end stop that slides on the end.

As the bulb was Singer I am guessing that the bar is possibly for a Singer. Perhaps it could be a horizontal one?

I was going to throw it away but suddenly thought that someone might have an empty place on their Singer crying out for this little metal stick. Its not very exciting - but for someone it might be!

Do I send or bin?!

Reply to
Sally Swindells
Loading thread data ...

I had something like that on my Viking for holding a third reel. Shirley

In message , Sally Swindells writes

Reply to
Shirley Shone

Reply to
Pat in Virginia

Seaside~~~~~~~~~~~~~~~uk

formatting link
the plastic end stop look like a Singer thread stopper? If so, Icould use it. Launie, in Oregon

Reply to
simpleseven

Seaside~~~~~~~~~~~~~~~uk

formatting link
Does the plastic end stop look like a Singer thread stopper? If so, I> could use it.

I know nothing about Singers (mine's a Janome) but end stopper is like a little hat. Base is approx 1/2" and top is approx 5/8". Its nice and shiney and going by the other things in the bag with it, it was put in there as a safe place so it didn't get lost. I just thought it might be a Singer as there was an old Singer bulb in with it.

If you want it, just drop me an e-mail with your address and I'll pop it in the post for you.

Reply to
Sally Swindells

Seaside~~~~~~~~~~~~~~~uk

formatting link
> Does the plastic end stop look like a Singer thread stopper? If so, I> > could use it.

Seaside~~~~~~~~~~~~~~~uk

formatting link
Hidequoted text -

Sally, That would be great. Do you want anything for it...maybe a fat quarter or two...or something else? What is your email address? I'm new to using a Usenet group and can't for the life of me figure out this! Thanks, Launie, in Oregon

Reply to
simpleseven

Sorry base is about 1/4" - it was too late at night when I wrote reply!

Reply to
Sally Swindells

Seaside~~~~~~~~~~~~~~~uk

formatting link
>> Does the plastic end stop look like a Singer thread stopper? If so, I>>> could use it.

Seaside~~~~~~~~~~~~~~~uk

formatting link
Hidequoted text -

e-mail address:

sally snipped-for-privacy@REMOVEhotmail.com

Just remove the REMOVE - its there to stop the addy being harvested by those people who collect them automatically and then send you lots of junk!

I get peoples e-mails by hitting the 'Reply to Sender button (I use Mozilla Thunderbird to read). Unfortunately it doesn't send the e-mail if you are Hotmail, so I then have to cut and stick to my normal Hotmail

- annoying!

Reply to
Sally Swindells

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.