I can't figure out how to disengage the cutter blades to just overlock, not cut. I haven't had the machine long and the manual makes no reference how to do this. Can someone help?
White super lock 534 Need Help (2025 Update)
Jul 09, 2015
Last reply: 1 year ago
4 Replies
The manual explains how to disengage the upper cutter on page 7:
formatting link
However, the whole point of having a cutter blade on a serger is cleanly to cut excess fabric from the edge so that the threads wrap around the edge. Otherwise you will jam up your serger with excess fabric.
There are a few techniques where you would want the blades disengaged (i.e. faux flatlock
formatting link
, are you doing one of them?
After looking in the parts book and users manual I do not believe on that model you can disengage the knives--
Ron Anderson A1 Sewing Machine
18 Dingman Rd Sand Lake, NY 12153
formatting link
Ron, I bow to your superior knowledge. Apparently the manual I discovered in my search was in error. Thanks again for participating here!
I have this sane machine and when I put two needles in the left needle hits the throat plate. It’s too far to left. What could cause this?
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required