Does anyone know of an attachment for a Dremel [or similar] that you can cut circles with? in the manner that you use a hole cut blade on a drill.... Actually I want the circles and I want them small.
Denise
-- The Homestead Store and More........ For a little bit of Alaska and a lot of the Northwest, drop by for a visit!
Denise, You might try the spiral bit that works in the Craftsman All-in-One cutting tool, which is for cutting sideways in things like wood, tile and wallboard. You can get the replacement bits at Sears for this tool and use it in you dremel. Looks to be about 1/8" diameter shaft so it will fit in your drill chuck.
-Jim Gott- San Jose, CA
Go to the Dremel site--there is a circle cutting attachment. However if you want them really small then a plug cutter might be a better bet.
Thank you, I will check it out. I was on a site with Dremel attachments, however it might not have been 'the' site. Thank you for telling me what to look for and where.
Denise
"J. Clarke" wrote:
-- The Homestead Store and More........ For a little bit of Alaska and a lot of the Northwest, drop by for a visit!
I just checked the Dremel site, which is of course, and found that they no longer show a circle guide for the small tools, just for the Advantage. On the other hand, the router attachments also have circle guides built in.
The Circle Guide is included in accessory kit Model 698, which is available at Home Depot . if you're in the US or Canada.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required