Floor Mounted Toolrest

Check out the lathe too. Isn't that a tractor sitting up top of those timbers???

Probably the power source for the 'lathe'.

What a picture! Outstanding!

John

I'd like to see his parting tool.

Jack

My gosh! is that a laid up bowl blank? it must have taken months to just do that! i couldnt get page to translate into english so could someone tell me the story around this turning?

I didn't know McNaughton made a set of "super humongous" coring blades! ;-)

Matt

Hi Don

Saw this picture last year I think on a Australian web site, I'll see if I can find it, what I recall of it is that they (wood turners group) made the bowl like a segmented bowl, used a farm tractor to drive the bowl with the rear wheel hub, there was also a picture of the turners group with the finished bowl.

have fun and take care Leo Van Der Loo

D> My gosh! is that a laid up bowl blank?

leo Have seen that au. one it was about 8' in dia and page was in english. this one must be twice that size.

Hi Don

OOPS, got to be bedtime, or something, took an other look and yes this is not the Australian one, just a look alike and BIGGER, who's next to better that ??

Good night

Have fun and take care Leo Van Der Loo

D> leo Have seen that au. one it was about 8' in dia and page was in

Hello all This segmented bowl is turnd by Peter Andres ,Swizerland . Many more pictures you find here: