I have a Stihl MS361 (Now discontinued). I am very happy with it but have started enjoying working larger pieces. Curious which saws people like for ripping larger pieces, up to 24" in length. I used a larger Husqvarna saw and it really went through the logs with ripping (Not sure of the model). I had looked at possibly 440 in Stihl or larger. Just curious what others are using. Since many other non woodturners don't rip logs just wanted some woodturners opinions. Thanks!
Saw Sizes - Model
Jul 13, 2010
1 Replies
On Mon, 12 Jul 2010 20:04:24 -0500, John Gbur wrote (in message ):
I did some log cabin work a number of years ago, and used an old Pioneer saw. I used a ripping chain, and the cut was very good and very fast. The cuttings were flying from the chain bar like so much fettucini. In essence, a rip chain has its depth control rakers ground way down, so the teeth can take a very agressive cut. It is my belief that if the engine has decent power and the chain is very sharp, you will do well. tom koehler
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required