Joe, Your trig is fine, the cork has an 8 degree included angle based on your numbers. The MSC bit you mention 1/2" & 7 degrees will have a diameter of
0.622" one inch up. I don't know how long the bit is, but if it is long enough (~2.5") you could use it by making through holes and then putting on a bottom piece. Martin
Joe, This diverges from your query, but as the corks might be in contact with something that the buyer swallows, you could make a show of paying attention to cleanliness and sanitation. That cork has led a checkered life before becoming a stopper, but some glassine or tissue, etc. wrapped around it might act as a decorative protective pad and shim plus show your concern.;) A bead of hot melt glue around the stand's orifices, as Soren Berger does with vacuum chucks, if polished might act as a non-marking O ring to hold the corks. Actually, I'm hunting for my tapered end mills. :)
BTW, A good trivia question to win a free glass of wine: I checked some wine bottles (not mine) today and the inside of the necks is slightly coved.
Well Joe, I guess I've made the last out again, and ended another thread. Arch
Non-linear thinking Arch. The hot melt glue comment got me thinking. I love the premise of an insert having a sanitary as well as decorative element. I really don't want to have to mount the stands on the lathe, line up the holes, etc but maybe there is some neat kind of white "O" ring or spacer or something that could be inlaid in the stand. That way I could drill the holes deep enough for the stopper to sit flush on the "O" ring or whatever. That would eliminate the tipping problem and might look kinda classy.
I really didn't like the looks of doing that directly on the stand itself but some kind of contrasting collar, preferably pre made, might be nice.
Off to Lowe's!
Thanks for the idea, Joe D>Joe, This diverges from your query, but as the corks might be in contact
----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
formatting link
The #1 Newsgroup Service in the World! >100,000Newsgroups---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---
I don't have an MSC catalog around. My old J&L has them listed "degrees per side". (That's usually stamped into a land on the body of the mill.) I assume these are used for milling draft for molds, etc. A 7 degree per side would mean total 14 degrees total included angle. I just looked at a couple of corks and they seemed to be about 9+ degrees total included angle, for which a 5 degree per side would be pretty close. Perhaps MSC lists them differently: I'd talk to a salesman before ordering anything.
VERY inexpensive, found at most craft stores, just cover the lip of the hole, rounded so shouldn't mark the cork too much, and can really compliment the color of many woods...
InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.