I have been experimenting with some tool rest designs and initial tests have been very successful. I now need 5 people to do further testing. Here are the rules. You do a lot of turning and have at least 2 years experience. Post is 1" in diameter. I need the TOTAL height of tool rest you want. On my 3520A the total height is 8" placing the top of the tool rest about 1" below center line when the tool rest is all the way down in the banjo. Max tool rest length is 12" and cost is $15 to pay for FedEx shipping. In return I would like your comments on the tool rest sent to me and posted on this group. My web site crashed and I haven't had time to correct it but there is and example of the old round and square designs but the one I will ship is much better that either of these designs. If you are interested email me your address and I will put you on the list of five and send you my address so you can send a check. I will ship by Monday. Also the name and state of the five will be posted on this site. Art Ransom Lancaster,TX snipped-for-privacy@comcast.net
- posted
19 years ago
formatting link
formatting link