Here is a finished picture of my main sewing table with my Bernina
1008 installed on it. The table was inlayed with Oak strips around the perimeter, and then smaller oak strips surrounding the sewing machine. It was refinished with Semi Gloss Varnish, and then waxed. The sewing machine is mounted in place by a bolt that passes through a hole in the table top and is secured in a threaded hole in the machine. This makes for a vibration free sewing environment. I can change sewing machines, by removing the bolt and then bolting the new machine in place. For people who complain of vibration of their machine, while sewing, this system is recommended as a great solution for those machines that have the mounting bolt holes in the base. Next on the agenda is doing the same sort of thing to the Janome 1600p table, with a bit more inlay of a decorative nature, on that oneJohn