Finally got the carving done on a bowl I've been picking away at for weeks. The whole idea started with me staring at cathedral facades and wondering if I coud get that same feel on a curved surface. So I went with repeating arched niches around the outside, and each one frames a carved human face. Between the niches there are lancet-like designs, and I spent a good while on the ornate detailing around the base. My hands were cramped by the end but I love how it looks. It's still unglazed, sitting on my banding wheel in the workshop under the work light. I keep walking past it and turning it a little to see the faces from diferent angles. There's something about raw clay that lets you really see the carving, all the shadows and texture. Not sure yet what direction I'll take it next. For now I'm just enjoying having it out on the wheel where I can look at it while I work on other stuff.
My cathedral bowl so far
Nov 19, 2026
Last reply: 1 hour ago
4 Replies
The way you describe walking past it and turning the wheel a little each time really hit home. I did a carved vase a couple of years back after obsessing over Romanesque church doorways, and I did exactly the same thing, catching it from different angles under the work light every evening. There is something about raw clay that makes the shadows do half the work for you.
I also know the hand cramps you are talking about. Mine got so bad I had to put the piece down for days at a time and come back to it, which honestly ended up helping because I'd spot things I wanted to change each time I returned. What I love about your idea is the curved surface part. I never thought about how arches and niches would wrap around a bowl, and the repeating rhythm you describe sounds like it would pull your eye all the way around the form. Was it hard keeping the spacing even as the wall curved away from you? That would be my worry with anything architectural, that the repetition would wander by the time you came back around.
Whatever you decide on finishing, I hope you keep enjoying it on the wheel for a while first. Mine stayed bare for months before I could bring myself to commit to anything.
I throw mostly and my patience for detail carving is embarrassingly short, so work like this baffles me in the best way. My own carving attempts tend to end with me smoothing everything back down and calling it intentional texture. The thought of framing a whole set of faces in repeating niches, each one demanding attention, is exactly the kind of project I'd start ambitiously and quietly abandon halfway around the bowl, hands cramping much earlier than yours apparently did. So the sheer follow-through earns my respect even more than the design does.
The bit I keep coming back to from your description is the ornate detailing around the base. On architectural work the foot is where the eye lands last but tends to linger, and it sounds like you gave that area real time instead of treating it as filler, which would have been my lazy instinct.
I'm curious what you're leaning toward for the finish, since it's still unglazed. With faces tucked under those arches, do you imagine a glaze pooling into the carved lines, or has the raw clay already won you over? I ask because I've fallen for pieces at the green stage myself, standing there turning them under the work light instead of getting on with the next step, and once that happens the decision tends to make itself.
Enjoy the rotating-it-every-time-you-walk-past stage. It's the part I miss most once a piece leaves the studio.
That instinct to leave it bare on the wheel for a while is one of the older habits I still swear by. Carving always reads honest in raw clay, before any glaze pools in the grooves and softens the edges you fought for. I remember being pushed to cover everything quickly back when I started, and it rarely did the work any favours. From the way you put it, the faces sound like they carry enough shadow on their own. One thing I'd be curious about, with all that detailing around the base, is whether you've been turning the wheel while you work on other pieces just to keep catching it fresh, or if you set it aside so it stays a surprise.
Those cramped hands at the end are so real. I carve small details into tiles sometimes and my thumb is always the first thing to give out, right when the fiddly bits around the edges need the most control. The detailing around the base sounds like the part where that would hit hardest, all those little elements stacked up low where you're bending over the wheel. Did you carve the faces freehand or mark them out first? I always chicken out on anything with eyes, one wonky look and the whole face goes from serene to alarmed. Yours must have come together well for you to keep circling back to check on them every evening.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required