A 4 function addition to the sewing room

Here is a link to something that I have been thinking about doing for a long time. The genesis of the idea is the need to fit different work areas into a too small and already overcrowded workspace. The items needed. 1. A layout table, to hold the cut pieces of fabric for use in quilting or clothing construction 2. A surface that can act as a writing surface for letter writing, and other communication endeavors. 3. A surface that can act as a sewing table for the use of a Serger for clothing construction. 4. A surface that can act as a drawing table with an inclined surface for Calligraphy, Drawing, and Designs of patterns, and other sewing or art related needs. What I came up with is something that will fill all those needs and still fit within the available space. The first picture is of the table itself, at rest, so to speak. Underneath it is a height adjustable stool that will accommodate all of the usage height needs, and still fit in under the table when not needed. To the rear of the stool is the most interesting element of this whole project. It is the drafting unit that is stored under there when not in use. The second picture is of the drafting unit itself, shown in the closed position laying on top of my cutting table. The third picture shows the drafting unit in the open position on the same cutting table. The final picture shows the drafting unit in place and ready for use. The drafting unit has extension lips that fit over the front and back of the table top and keep the whole thing from shifting around while in use, but still allows easy placement or removal. The storage compartment, at the rear of the drafting unit, can accommodate items of need during drafting or calligraphy, or drawing. It has a hinged top to act as a surface for the placement of the task lamp to shine over the work surface from above. The space on either side of the drafting unit, on the table top itself, provides a flat surface for inks, pens, or other things what would need to be kept level. I think this solves one of the biggest problems I have had with utilizing a small space with multi-faceted needs. The table itself is 42" wide a

22" deep x 30" tall. The drafting unit is 30" wide x 19" tall. The height adjustable stool goes from 18" up to 26" and is pneumatic and infinitely variable. An altogether successful solution to my needs, for a multifunctional work space. Enjoy,