Re: Treasure Boxes

Aug 19, 2008 5 Replies

I've just printed off the pattern for making one of these for my WI competition entry for a Wedding Favour. The biggest I can get the pattern to is 4.1/2" across which seems too small (when we got new computer all the toolbars changed so couldn't do 'Print to Page' which previous manufacturers have advised).



I will have to use the printer to enlarge, so could someone tell me the measurement I am aiming for. As the Interfacing the instructions say you need is an 8" square should I aim for 6" or 7"? I am going to put sugared almonds in it (left over from DD's wedding). Don't think I could even get one almond in the current pattern size! Don't need an enormous box, just the size they are 'meant' to be.



I know someone is currently manufacturing these in bulk - looked yesterday, but yesterday was a long time ago and my brain doesn't hold info. for that long any more!



Thanks someone out there!


You might be able to change your setting with your printer software. My boxes are bigger than the ones from the website because I inadvertently had "print to page" or (something like that) checked. Previous boxes were smaller. I'll try to send you my bigger pattern.

Sally, I tried to send you the pattern, but it bounced. Email me directly and I'll try to reply to that. I'm pretty sure I removed the obvious from your munged email addy. Since the pattern is a scan....the file is 2MB. Is that too big to email to you?

Just a suggestion from afar, you can press the F11 button to go "full screen" which gets rid of most if not all of the toolbars. Gives you more screen real estate to work with. Then press "CTRL+P" to print the page. Press F11 again to get your toolbars back.

AliceW in NJ

Thanks - it actually printed out at 3.1/2" though! I have both an 8" and a 10"+ pattern so I'm going to try these and see which I like best. I have the mini pattern I can increase in size, but just needed to know the horizontal measurement. The instructions call for an 8" square of fabric, and the 10" pattern will fit on corner to corner (forming an X).

Unfortunately Pellon is not a name used here - we have Vilene. I have two weights of the heavyish vilene, so will try both of those to see which looks best. The thickest one I have may look too thick - on the otherhand the slightly lighter one may be too light and the heavy one be right. I'll try the lighter one with the smaller box.

Thanks for the F11 hint - nice to be able to view docs on a whole screen without the toolbars.

Sally at the Seaside~~~~~~~~~~~~~~~uk

formatting link

AliceW wrote:

For a one time use, such as a table favor, you could use the lighter weight vilene and plenty of starch. I've made up that teeny one just for kicks....it would be very cute for something like an engagement ring! The thick vilene may show too much on the sides unless you want to to a full satin stitch around the edges to cover it or use a marker to color the edges if you don't like it showing. I know a lot of tricks by now....which reminds me....I have 40 to go. I need to get cracking! I saved the F11 hint in a computer tips file. I love learning new tricks.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required